Marine Instrument Accessories

GMI/GNX Protective Cover Use our protective cover to protect your device from the harsh marine environment when not in use. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

Power/Data Cable - 4-PinUse this 6' power/data cable to power your compatible echoMAP. Includes NMEA 0183 inputs/outputs.Compatible Devices: echoMAPâ„¢ Series WARNING: This product can expose you to chemicals which are known to the...

Bail Mount with Knobs for echoMAPâ„¢ Series Surface mount your echoMAPâ„¢ using our bail mount with knobs; the mount tilts for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary...

Field Installable ConnectorsUse our waterproof male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on our gWindT family of transducers when stepping the mast.Compatible Devices:GNDâ„¢ 10 Black Box...

gWind Transducer Only  010-12117-20 The gWind transducer features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design,...

Mast Bracket for gWind™/gWind Wireless Secure your gWind and gWind Wireless mast securely with this bracket. Compatible Devices:  GNX™ Wireless Sail Pack 43  GNX™ Wireless Sail Pack 52  GNX™ Wireless Wind Pack...

Tilt/Swivel Quick-Release MountSecure your compatible echoMAPâ„¢ with this mount, which features tilt/swivel capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords into the mount, allowing you...

Anemometer Wind CupsMeasure wind speed on your GWS™ 10 with this anemometer. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices:GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsvGSD™ 25 Premium...

Flush Mount Kit for echoMAP 73dv/7Xsv SeriesLooking for a sleeker installation of your echoMAPâ„¢ device? Garmin's flush mount kit allows you to easily position your device against most flat surfaces in your boat. WARNING: This product can expose you to...

GNDâ„¢ 10 Black Box BridgeThe Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and...

gWindâ„¢ Masthead To Nexus Instrument Connector Adapter CableUse Garmin's connector adapter cable to retrofit your gWind transducer for the Nexus network using your existing Nexus mast cable.Compaticle Devices:gWindâ„¢ Race TransducergWindâ„¢ Transducer...

Replacement Propeller f/gWindâ„¢ & GNDâ„¢ 10Don't let a missing propeller keep you from receiving accurate wind data. Our replacement propeller ensures you can maintain the twin-fin technology with 3-bladed propeller our gWindâ„¢ family of transducers...

Wind VaneDetermine wind direction with your GWSâ„¢ 10 with this wind vane. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...