Hardware

Suitable for use with boats featuring self-bailing cockpits, this 2-7/8 inch scupper valve features a rubber flapper that opens to drain water out and closes to prevent water from washing back in...

This Drain Plug was designed with a molded-in recess in the base to trap sealant and provide a more watertight seal. For transom installation, baitwells, ice chests, tanks, etc. 1” with gasket. UV...

Perko 1/2" Thru-Hull Fitting f/ Hose PlasticMolded White PlasticBroad FlangeTechnical Information:Hose Size Inches: 1/2Mounting Hole Diameter Inches: 13/16Maximum Hull Thickness Inches: 1-1/4O.D...

Attwood Marine Louver Vent Venturi/White/Bulk 1494F1 A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes...

Replacement parts for 520010 & 520020 series drain plugs.

Seachoice 90 Deg Elbow-7/8 -SS 38421 Made of cast 316 stainless steel, polished • 1/4" - 28 cup - point set screw included

Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a...

Attwood Marine Turbo 3000-3 Blower White 1733-4 The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. It provides powerful system output at a low...

Sea-Dog Line Deck Plate Bk Smoot 5 Qtr Trn 336155-1 Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a new locking system that prevents over tightening, jamming and cross threading...

Sea-Dog Line Delrin Flush Pull(Small) - Bla 227310-1 Injection molded Acetal.

Seachoice 90 Deg Universal Tee-7/8 -SS 38111 Polished  • 1/4" - 28 cup-point set screws included

Attwood Marine White 6" Deck Plate 12792-1 Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck...

Sea-Dog Line Stainless Hatch Adjuster - 321291-1 Hatch Adjuster - 11"  Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob...

Attwood Marine Louvered Vent Flush White 1425-5 Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411...

Webbing Lift Handle is constructed of nylon webbing with an injection molded nylon handle that is easy to hold even when wet. Ideal for replacement of worn or torn handles or to add another handle to...

Sea-Dog Line Stainless Drain Cover-2 1/2 In 331601-1   Stamped 304 Stainless Fasteners: #6 RH Vent Area .85 Sq. In.

Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion 304 resistant...

Attwood Marine Louvered Vent/Flush - Black 1423-5 Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with...

Seachoice Thru-Hull Conn-Black Plas-3/4 50-18151 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3” or 4” exhaust hose. Installs with four #8 FH fasteners (not included)...