Plumbing Fittings

1" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1" NPT x 1-1/8" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

G 1-1/4" BSPP Bronze 90 Degree Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread 90 degree Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1 Certified Note- C83600 bronze...

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in...

2" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

3/4" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

3/4" NPT #316 Stainless Steel In-Line Ball ValveFeatures:1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for drainingHandle has square hole to accept standard ratchet (helps you to...

Groco Strainer Cap O-Ring 2238 O-Ring for Groco Strainer Cap, fits model ARG-1500. 3.5 X 3.75 X .12

ARG-755 Series 3/4" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

Backing Block for 2" & 2-1/2" Seacocks Features: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure...

Groco Basket-304 SS 3.1 x 17.7 Bs-19 For 932-, ARG-, SA- & VD- series strainers.

BM-3 Monel Basket - 2.6" x 7.3"Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure...

BM-5 Monel Basket - 2.6" x 9.4"Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure...

BP-13 Poly Basket - 3.1 x 13.8"Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in...

Bronze Pipe Nipple - 1-1/2" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

Bronze Vented Loop - 1" Hose  Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or...

Stainless Steel Hose Barb Thru-Hull Fitting - 1/2" Features:NPS Thread With Hose Connection#316 Stainless SteelUL Listed 647B

3/4" FNPS Bronze Pipe to Hose Fitting Features: Female NPS X Hose connection C84400 Bronze Sizes from 3/4" to 2-1/2" Standard Flow Note- C84400 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water...