Plumbing Fittings

Seachoice Drain Plug-1 Twist-Brass 50-18801 Rugged construction for durabilityMount from inside transomBulk items come in reusable bucket. • Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. • Snap-Lock Plugs:...

Seachoice Gas Fill Cast SS-1 1/2 Hose 32251 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Seachoice Thru Hull W/SS Cover-1 1/2 90 50-18581 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Sherwood Pump P Bracket 1 (Strainer=18005) 14239Provides a sturdy mounting harness for Sherwood line strainers. Unique design enables easy trouble free assembly. Does not effect quick cleaning ability of strainer bowl.

Sherwood Pump P Bracket 1-1/4 (Strain=18016 14238 Provides a sturdy mounting harness for Sherwood line strainers. Unique design enables easy trouble free assembly. Does not effect quick cleaning ability of strainer bowl.

Shurflo Water Filter - 1/2 Hose Inle 255-323 Designed to connect directly to the inlet of SHURFLO pumps, the transparent design of these strainers allows for easy visual check, while the convenient bowl allows for fast cleaning. Available in both barb...

Attwood Marine 5/8" Baitwell Drain Plug 7534A3 Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.

Attwood Marine Drain Plug SS 1" Snap 7520A3Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Attwood Marine Plug-Snap Drain Br 7524A7Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Attwood Marine Thru Hull SS 5/8" Short 66540-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull Connector 5/8" White 3872-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Beckson Marine Check Valve For 1-1/2 Hose Cv-1-1/2 For 1-1/2" flexible hose to reduce back pressure and facilitate easier pumping.

1" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

1-1/2" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

1-1/2" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow.  Stainless steel handle and hardware...

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:  Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hullsAccept...

1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)