Plumbing Fittings

Sea-Dog Line Brass Baitwell Plug - 7/8 Inch 520095-1 Adjustable to tighten plug size to fit most bait wells. Made of stamped brass and neoprene.

Sea-Dog Line Brass Snap Handle Drain Plug - 520070

Sea-Dog Line Bronze Garboard Drain 520040-1Has a flange diameter of 2". Pipe size is 1/2". Fastener is #8 FH. Bronze.

Sea-Dog Line SS T-Handle Drain Plug -1-1/4 520086-1

Seachoice 90 Deg Elbow White 3/4 I.D.Hos 18211 Can be used for plumbing or aerator systemsMade of white high impact plastic for corrosion resistance.

Seachoice Baitwell Plug-3/4 -Brass 2/Pk 18961 For use in livewells or baitwellsStainless steel top and bottom plateBrass camNeoprene body.

Seachoice Garboard Drain Plug-Pipe 1/2 18751 Cast bronze flange • Brass plug • 2" OD • Fits 1/2" pipe • Mounts with #8 screws

Seachoice Gas Fill Nylon 1 1/2 Hose 32091 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Seachoice Thru Hull W/SS Cover-1 1/2 St 50-18481 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Shurflo Pressurere Regulator Chrome 183-029-14 SHURFLO's exclusive diaphragm design prevents high-pressure damage often caused by city water systems. These high performance water entries limit water pressure and include a check valve. 3/4" GSH female...

Attwood Marine Thru-Hull 3/4" 3873-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1" NPT x 1-1/8" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

G 1-1/4" BSPP Bronze 90 Degree Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread 90 degree Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1 Certified Note- C83600 bronze...

1-1/4" NPT x 1-1/8" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

2" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

3/4" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

3/4" NPT #316 Stainless Steel In-Line Ball ValveFeatures:1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for drainingHandle has square hole to accept standard ratchet (helps you to...