Plumbing Fittings

Sea-Dog Line Plugmate Garboard Wrench 520045-1The PlugMate&trade, garboard wrench will fit most standard and "T" style garboard plugs - (such as Sea-Dog part #520041 and 520043). In addition, the PlugMate&trade, has various deck plate keys and shackle...

Seachoice Drain Plug- 1 Twist-SS 18891 Rugged construction for durabilityMount from inside transomBulk items come in reusable bucket. • Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. • Snap-Lock Plugs:...

Seachoice Garboard Drain Plug-Pipe 1/2 18751 Cast bronze flange • Brass plug • 2" OD • Fits 1/2" pipe • Mounts with #8 screws

Seachoice Gas Fill Nylon 1 1/2 Hose 32091 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Seachoice Thru Hull Conn-White Plas-1 1/8 50-18091 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Attwood Marine Thru Hull SS 3/4" Short 66541-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru Hull SS 5/8" 66546-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull 1 1/8" 3874-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" NPT x 1-1/8" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore...

2" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

ARG-2500 Series 2-1/2" Raw Water Strainer Non-Metallic Strainer Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS...

ARG-750 Series 3/4" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

BP-6 Poly Basket - 3.1 x 10.1" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

2" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

BS-7 Stainless Steel Basket - 3.1" x 10.6" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-2015

4"Bronze Flanged Seacock Features:  1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

Groco Repair Kit For Sa1500 3000 Sa-3 For SA series single strainers.SA1 Includes: 2 #9R gaskets, S-64-A gasket & 500-K washerSA2 Includes: 2 #8R gaskets, S-751-A gasket & 500-K washerSA3 Includes: 2 #10R gaskets, S-86-A gasket & 504-F washer