Plumbing Fittings

1" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when...

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle...

1-1/2" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with...

1-1/2" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow...

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:  Eliminate dangerous thread miss-match when...

1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature =...

1/4" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for...

2" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk...

2" NPT x 2-1/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze...

3/4" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the...

BP-15 Poly Basket - 3.1 x 18.3" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these...

G 1-1/4" BSPP Bronze Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093

G 3/4" BSPP Bronze Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1

Bronze Vented Loop - 3/4" Hose  Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent...

Jabsco Par Y Waste Valve (454900000) 45490-1000 Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an...

Jabsco Pumpguard Strainer F/3/4 Hose 46200-0000 Prevents dirt and other particles from entering pump intake. Transparent housing for instant inspection. Quick in place cleaning of mesh screen.

Jabsco Regulator Flush with Mount Chrome 44411-2045 Protects your water system from damaging pressures of unregulated city water hook-ups. Available in two models - permanently installed flush mount...

Jabsco Regulator with Mount 45 PSI Chrome 44412-2045 Protects your water system from damaging pressures of unregulated city water hook-ups. Available in two models - permanently installed flush...