Plumbing Fittings

1-1/4" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

3" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use...

3/4" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow.  Stainless steel handle and hardware...

BP-2 Poly Basket - 1.9" x 7.2" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

Bronze Clam Shell Style Hull Strainer f/Up To 2-1/2" Thru Hull  Features: C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow Type: STD Mount Ring Incl.: No Max T-Hull: 2-1/2" Perf Dia.:...

Perko 1-1/4 Water Strainer 0493007Plb Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize...

Perko 3/4 Bronze Thru Hull with Nut 0322Dp5PlbCast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed.

Perko 3/4 Thru Hull Connection Bulk 0328Dp5Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline. UL Listed

Perko 6 Round Bronze Strainer 0086006Plb Cast bronze. Drilled holes.

Sea-Dog Line Thru Hull-1-1/8 520770Injection molded polypropylene.

Sea-Dog Line Thru-Hull Fitting 1 1/8" 520770-1 Injection molded polypropylene.

Seachoice Thru Hull Conn-White Plas-5/8 50-18031 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Seachoice Thru Hull W/SS Cover-1 Strat 50-18451 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Seachoice Thru Hull W/SS Cover-2 Strat 50-18491 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Seachoice Thru Hull W/SS Cover-3/4 90Dg 50-18541 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Shurflo Straight Fitting 1/2 x 5/8 244-2936 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Attwood Marine Drain Plug S.S. T-Handle 7518A3Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Attwood Marine Thru Hull SS 1-1/2" Short 66545-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru Hull SS 1-1/4" 66550-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

1" 90 Degree Hose Thru-Hull Fitting  Features: 90 Degree Barb #316 Stainless Steel Thru Hull with Bronze Hose Connection UL Listed 647B