Hardware

Attwood Marine 4-1/2 Popup Cleat Ctrsunk/Pkg 66510-7This cleat recesses flush to the deck for a clean, contemporary look. Two mounting styles include an exclusive stud-mounted cleat (Patented). Water-resistant cleat recesses into cast body, and is...

Attwood Marine 4-1/2 Popup Cleat Stud Mount/Pkg 66512-7This cleat recesses flush to the deck for a clean, contemporary look. Two mounting styles include an exclusive stud-mounted cleat (Patented). Water-resistant cleat recesses into cast body, and is...

Attwood Marine Auto Float Switch Only 12V + 4202-7 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris...

Attwood Marine SS 8mm Ext 12 Cmp 8.5 60# St35-60-5These popular aftermarket stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed...

Attwood Marine Thru Hull SS 5/8" 66546-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull 1 1/8" 3874-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Beckson Marine Deckplate 6" White Screw Nonski Dp64-W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an...

Beckson Marine 8 White Pry-Out Diamond Nonskid Dp85-WAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Deckplate 8" Neu Pry Nonskid Dp85NAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Hand Pump 18" 118P Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.

Beckson Marine Port Opening White/Clear 5 x 12" Po512Dwc20 Designed primarily for cabin sides with excessive angles and where other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45&deg,...

Beckson Marine Port White/Clear 4X10 1"sp Po410Wc10Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No...

Beckson Marine Soft Cowl Vent 4-1/2X4-3/4X2-1/4 Sc-7PVC. Ideal for areas where vent will be under foot or foul lines.

Bomar Gasket 9/16X10' F/Cast Hatche P10055

Bomar Hatch Access 10X20 Cream G7102022Molded of high impact UV stable polypropylene. Hatch is low profile for floor mounting. No screws are visible from the exterior. Hatch opens 180°. Has a strong lid with support bars and a double gasket for...

Bomar Hatch Inspection 10 1/4X14 1/4 G871122 Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

Bomar Hatch Low Pro 16-1/2 x 16-1/2 N107010AStyle A-external hinge. Anodized heavy-duty aluminum frames. Heavy-duty acrylic top. No sharp corners to snag lines or sails. Heavy-duty hinges, quick acting, adjustable tie down dogs. Locked vent position.

Bomar S616 SS Port with Scrn Tab Ring S616Mbss   Polished stainless steel Friction hinge for opening in any position Complete with outside finishing ring Smoked acrylic with polished edges Internal mounting holes Adjustable quick dogs

1" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline