Hardware

Trident Hose Silicon Exhaust Hose 4" x 3' 202V4000Ultimate quality silicone marine exhaust and water hose. Very high temp. 4 to 6 ply polyester reinforcement 350°F (177°C). Dramatically exceeds all...

Attwood Sahara MK2 S120

Attwood Marine Cleat 8" Cast Aluminum 12127-3 Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.

Attwood Marine Dock Cleat 6" Iron 12100L3Galvanized finish. Two holes for required fasteners.

Attwood Marine Drain Plug S.S. T-Handle 7518A3Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Attwood Marine Gas Spring Bracket 2H 90D 2/Pk Sl50SSp3-7Mounting bracket: pem type: Ball 10mm. direction forward.

Attwood Marine Shower Pump System 750 Gph 12V 4143-4This sump box features an air vent to prevent air locks, slotted mounts for easy installation & removal, a straight mesh filter to provide easy...

Attwood Marine Thru Hull SS 1-1/4" 66550-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation...

Beckson Marine Clip Mate 11/16" To 7/8" 2/ Cm34Made of marine plastic. Holds boat hooks, bilge pumps, oars, flashlights, and chart tubes. Stainless steel screws included.

Beckson Marine Deckplate 4" Screw White Dp44W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning...

Beckson Marine Deckplate 4" White Non-Skid Dp42W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning...

Bomar Hatch Inspection 10 1/4X14 1/4 G871122 Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and...

Bomar Inspect Hatch 18-1/2X20-3/16 G8161822Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and...

1" 90 Degree Hose Thru-Hull Fitting  Features: 90 Degree Barb #316 Stainless Steel Thru Hull with Bronze Hose Connection UL Listed 647B

1-1/2" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

1-1/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The...

1-1/4" NPS NPT Combo High Speed Pickup Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 3"...

3/4" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match...

ARG-500 Series 1/2" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter...

BM-2 Monel Basket - 1.9" x 7.2" Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a...