Hardware

Beckson Marine Deckplate 8" Neu Pry Nonskid Dp85NAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Hand Pump 18" 118P Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.

Beckson Marine Port Opening White/Clear 5 x 12" Po512Dwc20 Designed primarily for cabin sides with excessive angles and where other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45&deg,...

Beckson Marine Port White/Clear 4X10 1"sp Po410Wc10Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No...

Beckson Marine Soft Cowl Vent 4-1/2X4-3/4X2-1/4 Sc-7PVC. Ideal for areas where vent will be under foot or foul lines.

Bomar Hatch Access 10X20 Cream G7102022Molded of high impact UV stable polypropylene. Hatch is low profile for floor mounting. No screws are visible from the exterior. Hatch opens 180°. Has a strong lid with support bars and a double gasket for...

Bomar Hatch Low Pro 16-1/2 x 16-1/2 N107010AStyle A-external hinge. Anodized heavy-duty aluminum frames. Heavy-duty acrylic top. No sharp corners to snag lines or sails. Heavy-duty hinges, quick acting, adjustable tie down dogs. Locked vent position.

Bomar S616 SS Port with Scrn Tab Ring S616Mbss   Polished stainless steel Friction hinge for opening in any position Complete with outside finishing ring Smoked acrylic with polished edges Internal mounting holes Adjustable quick dogs

1" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

1-1/4" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible...

2" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

3" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

ARG-2500 Series 2-1/2" Raw Water Strainer Non-Metallic Strainer Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS...

BM-2 Monel Basket - 1.9" x 7.2"Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure...

BP-2 Poly Basket - 1.9" x 7.2" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

BP-8 Poly Basket - 3.1 x 12.4" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1" Thru Hull  Features: Mount ring design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow...

BS-12 Stainless Steel Basket - 3.1" x 11.9" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-3015