Hardware

Rule Bilge Pump-500gph 12V 25Da Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. Higher Flow optimized impeller to provide greater flow at the same...

Rule Rule Lopro 900 Standard Bilge Pump Lp900D LoPro&trade, LP900D Bilge Pump is a low profile pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only...

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 2800-3700gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the...

Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower...

Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing...

For use to add or replace a tie-down point on your boat's bow these bow eyes feature a die cast chrome plated zinc head with a galvanized shaft. 3/8"-16 UNC threads. Nut and washer included...

Sea-Dog Line Brass Door Hook - 2 Inch 222056-1 Carded.

Deck Fill Key is constructed of investment cast 316 stainless steel. For use with all Fill Caps with 1-3/16" holes on center.

Anti-Rattle Latch - Sand-Cast Chrome-Plated BrassAnti-Rattle Latch features an open-mount, center-tensioning cam latch for a tight, no-rattle seal. Latch also features a locking hole that will accept...

Sea-Dog Line Deck Plate -Screw Out 4" White 337140-1 Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck...

Sea-Dog Line Deck Plate Bk Smooth 8 Qtr Trn 336385-1 Quarter-turn deck plates with internal collar are molded with a collar on the bottom to hold deck plate bags or other round containers. Note:...

Sea-Dog Line Deck Plate Wh Textu 5 Qtr Trn 336352-1Quarter-turn deck plates with internal collar are molded with a collar on the bottom to hold deck plate bags or other round containers. Note: Avoid...

For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed...

Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc., these tie down eye straps can be used for a multitude of applications. Their flat, low profile makes them...

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 316...

Consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant, stainless...

Corrosion resistant stamped 304 stainless steel, consist of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Installs with four #8 FH fasteners (not included).

Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" – 11-1/2 NPSM straight threaded pipe. Includes attachment...

Sea-Dog Line Plugmate Garboard Wrench 520045-1 The PlugMate&trade, garboard wrench will fit most standard and "T" style garboard plugs - (such as Sea-Dog part #520041 and 520043). In addition, the...