Hardware

Attwood Marine Float Switch with Cover & Packard 4201P1 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters...

Attwood Marine Plug/Receiver Kit 17211-3 Molded black ABS plastic with threaded receiver. Molded retaining strap. Includes attaching screws and elastomeric gasket for a watertight fit.

Attwood Marine Quick Disconnect Seat Mount 7 11603D1 Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.

Attwood Marine Replacement Cap/Chain (For 66074-3 316 Stainless Steel. Replacement cap attached with stainless steel beaded chain. 2 year warranty.

Attwood Marine Thru Hull SS 1-1/8" Short 66543-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull Con. 90 Deg 3/4" Wh 38773Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Beckson Marine 18 Hand Pump with 20 Hose 118PfSelf-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine 36 Hand Pump with 36 Hose 136PfSelf-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine 6 White Screw-In Dp with Clear Ctr Dp60-W-CBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an...

Beckson Marine 8 O Ring F/Screw-In Deck Plate D8P-G

Beckson Marine 8 White Pry-Out Dp with Non-Skid Dp83-WAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Cowl Vent with Hose Adapter F/3 C-7White ABS vent cap with vent hose adapter that mounts to deck. Vents snaps into place on adapter.

Beckson Marine Deckplate 6" Neu Pry Nonskid Dp65-NAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Port Opening White/Clear 7 x 14" Po714Wc10 Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge...

Bomar Right Riser Arm 17" P20007517

1-1/2" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/2" NPS NPT Combo High Speed Pickup Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 3" Available with or without...

1-1/2" NPT x 1-3/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61...

2" NPS NPT Combo High Speed Pickup Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 3" Available with or without nut BSPP models...

3/4" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow.  Stainless steel handle and hardware...