Hardware

Beckson Marine Deckplate 8" Neu Pry Nonskid Dp85NAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Port White/Clear 4X10 1"sp Po410Wc10Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No...

Beckson Marine Soft Cowl Vent 4-1/2X4-3/4X2-1/4 Sc-7PVC. Ideal for areas where vent will be under foot or foul lines.

Bomar Hatch Access 10X20 Cream G7102022Molded of high impact UV stable polypropylene. Hatch is low profile for floor mounting. No screws are visible from the exterior. Hatch opens 180°. Has a strong lid with support bars and a double gasket for...

Bomar Hatch Low Pro 16-1/2 x 16-1/2 N107010AStyle A-external hinge. Anodized heavy-duty aluminum frames. Heavy-duty acrylic top. No sharp corners to snag lines or sails. Heavy-duty hinges, quick acting, adjustable tie down dogs. Locked vent position.

Bomar Inspect Hatch 18-1/2X20-3/16 G8161822Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

1" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/2" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

1-1/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

1-1/4" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible...

1-1/4" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

1/2" Bronze In-Line Check ValveFeatures:C83600 cast bronze constructionNPT threaded ports1/2" - 2" sizesSuitable for use with diesel fuel or gasoline

2" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

2" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible handle...

2" NPT x 2-1/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

3" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

BM-2 Monel Basket - 1.9" x 7.2"Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure...

Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1" Thru Hull  Features: Mount ring design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow...

Bronze Slotted Hull Scoop Strainer with Access Door for Up to 2" Thru Hull Features: Access door design allows easy access to Thru Hulls C84400 bronze body and door Cast filter slots Pressure relief holes in door casting