Plumbing

Sea-Dog Line Replacement Plug And Gasket 520021-1

2-1/2" NPS NPT Combo Bronze Thru Hull Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

3" NPT Bronze Full Flow Pipe to Hose Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

BP-5 Poly Basket - 2.6" x 9.4" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

Bronze Pipe Nipple - 3/4" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

Rule Bilge Pump-800gph 12V 20Da Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. Higher Flow optimized impeller to provide greater flow at the same amperage Built-in Thermal Cut-Off (TCO) Back Flow...

Attwood Marine Thru Hull SS 1-1/8" 66549-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

1" NPT x 1" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

1/2" NPT x 3/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2" Hose Barb Stainless Curved Hose Thru Hull Features: 90 Degree Barb #316 Stainless Steel Thru Hull with Bronze Hose Connection Sizes from 3/4" to 1-3/4" Barb UL Listed 647B

2" NPT x 2-1/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore...

Stainless Steel Hose Barb Thru-Hull Fitting - 5/8"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

3/4" NPS NPT Combo Flush Thru Hull Features: Machined flat face for flush mount or dripless applications NPSM / NPT combination thread C84400 Bronze Sizes from 1/2" to 5" Available with or without nut

Johnson Pump Control Panel Macerator Toilet 81-47520-01

Rule 500 GPH Replacement Motor Cartridge for Tournament Series Pumps The innovative Tournament Series Pumps feature these removable motor cartridges, which are fast and convenient to replace. Features: 500...

Sea-Dog Line Cast Stainless Garboard Drain 520060 Investment Cast 316 StainlessThe Captive Garboard Drain & Plug is a direct replacement for the traditional style Sea-Dog Line bronze Garboards, part numbers 520040 and 520042. Captive plug means no...

Sea-Dog Line Nylon Drain Plug 520010-1 Designed with a molded-in-recess in the base, thus trapping the sealant in place and providing a more water-tight seal. 1" hole dia. #10 FH

Seachoice Thru-Hull-White Plas 1 1/8 18090 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Attwood Marine SS Replace Cap For Deck Fill 66061-3 316 Stainless Steel. Replacement cap attached with stainless steel beaded chain. 2 year warranty.

Attwood Marine Thru Hull SS 3/4" 66547-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.