Plumbing

Attwood Marine Float Switch with Cover 12V 4201-7 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris...

1-1/4" NPT x 1-1/2" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" NPT x 1-1/2" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2-1/2" NPT Bronze Full Flow Pipe to Hose Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

3" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded...

3/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

3/8" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole...

BP-1 Poly Basket - 1.9" x 5.2" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/4"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Johnson Pump 3/4 Thru Hull 90Deg. 75035-00 Fittings are molded of tough acetal resin so they will not rust, corrode, discolor nor are they susceptible to electrolysis.

Johnson Pump 5.2 gpm Wash Down Kit 70 psi 64534 New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5...

Perko Combo Gas Fill & Tank Vent-Wh 0542Dpgwht Polymer body, cap and strap. Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Rule Bilge Pump-500gph 12V Auto 25Sa Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100&deg, cooler. No burn-out when dry. Moisture...

Sea-Dog Line Brass Tee Handle Drain Plug - 520080

Sea-Dog Line Stainless Impeller Puller - La 660020-1 Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.

Sherwood Pump P Seastrain 1 (Bracket=14239) 18005 Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl...

Shurflo 12 Volt Macerator 3200-001 Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with o-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual,...

Trident Hose Hose-Sae J1942 1.5 x 12.5' 321-1124 This unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including: Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet...

Attwood Marine Thru Hull SS 1" 66548-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.