Plumbing

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

1-1/2" Hose Barb Stainless Hose Thru Hull Features: NPS Thread With Hose Connection #316 Stainless Steel Sizes from 1/2" to 2" Barb UL Listed 647B

1-1/2" NPS NPT Combo Flush Thru Hull Features: Machined flat face for flush mount or dripless applications NPSM / NPT combination thread C84400 Bronze Sizes from 1/2" to 5" Available with or without nut

Rubber Gasket Kit for Size 8, 9, & 10 Strainers This gasket kit is for use on Perko intake water strainers. More specifically, this gasket kit fits Perko strainers that are sizes 8, 9, and 10. Kit Includes: Cover...

Rule 500 GPH Replacement Motor Cartridge for Tournament Series Pumps The innovative Tournament Series Pumps feature these removable motor cartridges, which are fast and convenient to replace. Features: 500...

Sea-Dog Line Polyin-Line Strainer-5/8" Ho 364136 Removable clear lens for ease of cleaning and changing filter. Comes with stainless steel filter screen. #10 RH fastener. Bulk pack.

Sea-Dog Line Scupper Valve - 1 1/2 Inch 520500-1 Injection molded nylon. Carded.

Seachoice Gas Fill-Cpz-1 1/2 Hose 32041 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Shurflo Water Filter - 1/2 Pipe Inle 255-313 Designed to connect directly to the inlet of SHURFLO pumps, the transparent design of these strainers allows for easy visual check, while the convenient bowl allows for fast cleaning. Available in both barb...

Shurflo Problaster II Ultimate 5.0 4258-153-E09Perfect for tough washdown applications, such as fish box, scaling and anchor chains. These rugged self-priming pumps deliver high lift, can run dry without damage, won't overheat with extended use, and...

Trident Hose Clamps T-Bolt 1-3/8-1-1/2" 7201120 Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

1-1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

1-1/2" NPT Bronze 45 Degree Pipe to Hose Fitting Features: 45 degree Male NPT x Hose connection C83600 Bronze Sizes from 3/4" to 3" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" NPS NPT Combo XL Bronze Thru Hull Features: Extra long NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 2" Available with or without nut Stainless Steel models available

3/4" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

Bronze Pipe Nipple - 2" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

FEATURES Switch turns bilge pump off and on  by sensing changes in pressure (caused by rising or falling bilge water level) in its air tube. No floats to stick or fill with water. Approximate levels are "ON" at 2-3/4" of bilge level and "OFF" at 1"...

Jabsco Repair Kit 581071000  

Sea-Dog Line Fresh Water Inlet SS 513110-1 Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water...

Sea-Dog Line Gas Fill 1-1/2 with Splash Guard 351750-1 Die cast zinc chrome plated. Cap includes chain. Use #10 FH fastener.