Plumbing

1" NPT x 1-1/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

2" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available

2" NPT x 2" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61...

ARG-1003 Sight Glass Fits ARG-1000Sight glass fits the ARG-1000.

Bronze Round Hull Strainer with Access Door for Up To 2" Thru-Hull  Features: Patented access door design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter holes. Designed for systems where forced flow is not needed or...

Stainless Steel Hose Barb Thru-Hull Fitting - 2"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

3/4" Hose Barb Stainless Hose Thru Hull Features: NPS Thread With Hose Connection #316 Stainless Steel Sizes from 1/2" to 2" Barb UL Listed 647B

Stainless Steel Hose Barb Thru-Hull Fitting - 5/8"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Jabsco Pump Macerator Heavy Duty 12V Sv-18590-2092Self priming pump with run dry protectionTriple sealed motor to prevent both internal & external motor corrosion.Four-bladed chopper reduces clogging.Flow rate to 12 gpm Self-priming to 4ft vertical lift...

Sea-Dog Line Washdown Water Outlet SS 513120-1Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.

Seachoice Large Self Bailing Scupper 18281 Automatically seals and drains self bailing decksMade of polycarbonate materialSolid polyethylene ball and PVC seal mounts on transom above water line18271 and 18291 designed to retrofit Model 18261

Seachoice SS Garboard Drain & Plug Prem 18661 316 Stainless steel threaded removable plugRetention system keeps plug from getting lostHigh polished 316 stainless steel reduces corrosionGuaranteed for life.

Trident Hose Type A1 Barrier Lined 3/8 x 50 3650386Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified,...

1-1/2" NPT x 1-1/2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

2" NPT x 2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

Backing Block for 1-1/4" & 1-1/2" SeacocksFeatures:Each size fits multiple seacock sizesPress threaded brass inserts into the hull side of the backing block into the holes that match the seacock flangeRigid 1/2" thickness provides secure installation...

1-1/2" Hose Barb Stainless Hose Thru Hull Features: NPS Thread With Hose Connection #316 Stainless Steel Sizes from 1/2" to 2" Barb UL Listed 647B

Groco Strainer Repair Kit (Sa1000) Sa-2For SA series single strainers.SA1 Includes: 2 #9R gaskets, S-64-A gasket & 500-K washerSA2 Includes: 2 #8R gaskets, S-751-A gasket & 500-K washerSA3 Includes: 2 #10R gaskets, S-86-A gasket & 504-F washer

Sea-Dog Line Hdpe Motorwell Drain Tube 520320-1Molded heavy-duty plastic. Carded.1-1/4" OD x 3/4" L - 2-1/2" L