Plumbing

Groco Basket-304 SS 3.1 x 12.0 Bs-16 For 932-, ARG-, SA- & VD- series strainers.

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/8"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Rule 2000gph Pump 12V Sv-10 Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.106UL & 14A6UL: UL Listed and include 6' leads. Gold Series: feature a 5-year warranty.

Sea-Dog Line Deckfill 1-1/2" Water No Key 357033Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel; &...

1-1/4" NPT x 1-1/4" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in...

Johnson Pump Electro-Magnetic Float Switch 36152Compact mechanical switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at ¾" water level...

Seachoice Large Self Bailing Scupper 18281 Automatically seals and drains self bailing decksMade of polycarbonate materialSolid polyethylene ball and PVC seal mounts on transom above water line18271 and 18291 designed to retrofit Model 18261

Bronze Pipe Nipple - 1/2" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

2" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to...

Groco Strainer Repair Kit (Sa1000) Sa-2 For SA series single strainers.SA1 Includes: 2 #9R gaskets, S-64-A gasket & 500-K washerSA2 Includes: 2 #8R gaskets, S-751-A gasket & 500-K washerSA3 Includes: 2 #10R gaskets, S-86-A gasket & 504-F...

Perko Spare Cap with Chain 0540Dpg99A Replacement chrome plated bronze cap fits 540 or 541 series vented fill for 1-1/2" hose.

Shurflo Straight Fitting 1/2 x 1/2 244-2926 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Attwood Marine SS Scupper Valve 66553-3 Rugged stainless steel contruction. Backed by Attwood's trusted Lifetime Warranty! Scupper flap is tough neoprene rubber with a molded V to reduce back wash comes with a silicone gasket Cast from certified...

Trident Hose Clamps T-Bolt 4" 7204000LUsed with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Attwood Marine Thru Hull 1-1/2" White 3875-3 Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available

Shurflo Aqua King II Pump Standard 12V 4138-111-E65 Four chamber design for smooth flow at all demand levels. No rapid cycling. Designed and built specifically for the harsh marine environment, they are dry self-priming up to 6' and can run dry without...

Backing Block for 1-1/4" & 1-1/2" Seacocks Features: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure...