Plumbing

Seachoice Thru-Hull Conn-White Plas-3/4 - 18050 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

3/4" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available

3/4" Bronze Extra Long Thru-Hull Fitting w/Nut  Features: Extra long NPSM / NPT combination thread C83600 Bronze

BP-3 Poly Basket - 2.6" x 7.3" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

Johnson Pump Cartridge F/500gph Bilge/Aerat 28552   Replacement motor cartridges for JP aerators, bilge, low boy, twinport, and shower sump pumps Universal pump housing allows for upgradeable GPH Motors fits JP aerators, bilge, lowboy,...

Seachoice Drain Plug-1 1/4 -Twist-Brass 50-18861 Rugged construction for durabilityMount from inside transomBulk items come in reusable bucket. • Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. • Snap-Lock...

1" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to...

1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore...

Non-Metallic Strainer Cap Fits ARG-1500 & Larger Features: Non-Metallic Strainer Cap  Fits ARG-1500 & Larger

3/4" NPT x 3/4" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance...

Shurflo Problaster II Deluxe 5.0 24V 4258-163-E09 Perfect for tough washdown applications, such as fish box, scaling and anchor chains. These rugged self-priming pumps deliver high lift, can run dry without damage, won't overheat with extended use, and...

Seachoice Thru-Hull Conn-White Plas-3/4 50-18051 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Seachoice Thru-Hull Conn-White Plas-5/8 - 18030 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

3/4" Bronze High Speed Thru-Hull Fitting w/Nut  Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze

Rule Bilge Pump-360gph 12V 24Da Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. Higher Flow optimized impeller to provide greater flow at the same amperage Built-in Thermal Cut-Off (TCO) Back Flow...

Sea-Dog Line Sink Drain 2 with Tailpiece 517526-1   Zinc/Stainless/Nylon construction 5/8" Barb on drain Fits 2" drain opening

Seachoice 4-Long Thru-Hull 3/4 -White Pla 18161 Extra long molded high impact white plastic with broad flangeDesigned for installation where thick transoms or side walls require up to 2-1/2" long threadNot recommended for use below the waterline.

Non-Metallic Strainer Cap Fits ARG-500 & ARG-750 Features:  Fits ARG-500 & ARG-750 Cap, Plastic   Does not come with O-rings Order O-rings Part #(2-135) & (2-228) Separately

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/8"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Sea-Dog Line Deckfill 1-1/2" Water No Key 357033Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel; &...