Hardware
-
Shurflo Problaster II Deluxe 5.0 24V 4258-163-E09
Shurflo
$556.09 $389.99Shurflo Problaster II Deluxe 5.0 24V 4258-163-E09 Perfect for tough washdown applications, such as fish box, scaling and anchor chains. These rugged self-priming pumps deliver high lift, can run dry without damage, won't overheat with extended use, and...- Part Number:
- 275-4258163E09
- Availability:
- In Stock - Ships same or next business day.
- GPM:
- 5
- PSI:
- 60
- Volts:
- 24
- Amps:
- 8
- Size:
- 10" x 5" x 4-3/4"
$556.09 $389.99 -
Attwood Marine Gas Spring 20X11.75C 60Lb Sl34-60-5
Attwood Marine
$31.33 $19.99Attwood Marine Gas Spring 20X11.75C 60Lb Sl34-60-5 Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117,...- Part Number:
- 23-SL34605
- Availability:
- In Stock - Ships same or next business day.
- Extended:
- 20"
- Compressed:
- 12"
- Stroke:
- 8
- Socket:
- 10mm Composite
- Force:
- 60 lbs.
- Rod:
- 8mm
$31.33 $19.99 -
Attwood Marine Spring Lift 17.2 x 10.5 C30# Sl36-30-5
Attwood Marine
$31.33 $19.99Attwood Marine Spring Lift 17.2 x 10.5 C30# Sl36-30-5 Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM...- Part Number:
- 23-SL36305
- Availability:
- In Stock - Ships same or next business day.
- Extended:
- 17.2"
- Compressed:
- 10.2"
- Stroke:
- 7
- Socket:
- 10mm Composite
- Force:
- 30 lbs.
- Rod:
- 8mm
$31.33 $19.99 -
Attwood Marine Twist-On Hose Flange F/3 Hose 1405-3
Attwood Marine
$15.59 $9.99Attwood Marine Twist-On Hose Flange F/3 Hose 1405-3 For 3" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene...- Part Number:
- 23-14053
- Availability:
- In Stock - Ships same or next business day.
$15.59 $9.99 -
Beckson Marine 6 Black Screw-In Deck Plate Dp60-B
Beckson Marine
$38.10 $34.99Beckson Marine 6 Black Screw-In Deck Plate Dp60-B Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...- Part Number:
- 35-DP60B
- Availability:
- In Stock - Ships same or next business day.
- ID:
- 6"
- OD:
- 8-1/8"
- Hole:
- 6-1/2"
- Color:
- Black
- Center:
- Smooth
$38.10 $34.99 -
Seachoice Thru-Hull Conn-White Plas-3/4 50-18051
Seachoice
$6.22 $5.99Seachoice Thru-Hull Conn-White Plas-3/4 50-18051 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.- Part Number:
- 50-18051
- Availability:
- In Stock - Ships same or next business day.
- Hose:
- 3/4"
- Flange:
- 1-1/2"
- Max Hull Thickness:
- 1-1/4"
$6.22 $5.99 -
Seachoice Thru-Hull Conn-White Plas-5/8 - 18030
Seachoice
$4.25 $4.13Seachoice Thru-Hull Conn-White Plas-5/8 - 18030 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.- Part Number:
- 50-18030
- Availability:
- In Stock - Ships same or next business day.
- Hose:
- 5/8"
- Flange:
- 1-5/8"
- Max Hull Thickness:
- 1-1/4"
- Pkg.:
- Bulk
$4.25 $4.13 -
Perko Sliding Window Stop 0935Dp0Chr
Perko
$29.19 $24.99Perko Sliding Window Stop 0935Dp0Chr Chrome plated zinc with plastic cover on stopping plate. Stopping plate is 1-1/2" long. Mounting plate is 1-7/8" x 3/4".- Part Number:
- 9-0935DP0CHR
- Availability:
- In Stock - Ships same or next business day.
- Fastener:
- #8
$29.19 $24.99 -
Sea-Dog Line 7/8"-60Deg Cp Zinc Rect. Base 286160-1
SEA-DOG LINE
$16.75 $14.99Sea-Dog Line 7/8"-60Deg Cp Zinc Rect. Base 286160-1 Die-cast zinc, chrome plated.- Part Number:
- 354-2861601
- Availability:
- In Stock - Ships same or next business day.
- Angle:
- 60 Deg -
- Base:
- 1-5/8" x 2-3/4"
- Tube:
- 7/8" OD
- Fastener:
- #10 FH
$16.75 $14.99 -
Seachoice Black Cleat-10 30861
Seachoice
$12.49 $9.25Seachoice Black Cleat-10 30861 Durable and non-corrosive.- Part Number:
- 50-30861
- Availability:
- In Stock - Ships same or next business day.
- Size:
- 10" L
- Center to Center:
- 3-1/8"
- Line Size:
- Up To 1"
- Fastener:
- 5/16"
$12.49 $9.25 -
GROCO 3/4" Bronze High Speed Thru-Hull Fitting w/Nut HSTH-750-W
Groco
$23.00 $18.993/4" Bronze High Speed Thru-Hull Fitting w/Nut Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze- Part Number:
- 34-HSTH750W
- Availability:
- In Stock - Ships same or next business day.
- Pipe:
- 3/4" NPS
- Flange:
- 1.9"
- Length:
- 2.2"
$23.00 $18.99 -
Rule 360GPH Standard Boat Bilge Pump - 12V - 24DA
Rule
$36.99 $25.99Rule Bilge Pump-360gph 12V 24Da Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. Higher Flow optimized impeller to provide greater flow at the same amperage Built-in Thermal Cut-Off (TCO) Back Flow...- Part Number:
- 29-24DA
- Availability:
- In Stock - Ships same or next business day.
- GPH:
- 360
- Hose:
- 3/4"
- Volts:
- 12
- Amps:
- 2.1
$36.99 $25.99 -
Sea-Dog Line Semi Concealed Hinge Stainless 201916-1
SEA-DOG LINE
$14.80 $13.99Sea-Dog Line Semi Concealed Hinge Stainless 201916-1 Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. Fasteners needed #6 RH.- Part Number:
- 354-2019161
- Availability:
- In Stock - Ships same or next business day.
- Material:
- Stainless
- A:
- 2-3/16"
- B:
- 2-3/4"
- C:
- 1/16"
- D:
- 1-1/2"
- E:
- 3/8"
$14.80 $13.99 -
Sea-Dog Line Sink Drain 2 with Tailpiece 517526-1
SEA-DOG LINE
$27.45 $24.99Sea-Dog Line Sink Drain 2 with Tailpiece 517526-1 Zinc/Stainless/Nylon construction 5/8" Barb on drain Fits 2" drain opening- Part Number:
- 354-5175261
- Availability:
- In Stock - Ships same or next business day.
$27.45 $24.99 -
Sea-Dog Line Stainless Gate Latch-Pontoon 221880-1
SEA-DOG LINE
$46.95 $40.18Sea-Dog Line Stainless Gate Latch-Pontoon 221880-1Investment cast 316 stainless steel. Designed to be used with 1-1/4" square tubing, great for pontoon gates. 1/4" Bolt fastener.- Part Number:
- 354-2218801
- Availability:
- In Stock - Ships same or next business day.
- A:
- 1-1/4"
- B:
- 1-1/4"
- C:
- 2-1/2"
$46.95 $40.18 -
Seachoice 4-Long Thru-Hull 3/4 -White Pla 18161
Seachoice
$9.84 $8.99Seachoice 4-Long Thru-Hull 3/4 -White Pla 18161 Extra long molded high impact white plastic with broad flangeDesigned for installation where thick transoms or side walls require up to 2-1/2" long threadNot recommended for use below the waterline.- Part Number:
- 50-18161
- Availability:
- In Stock - Ships same or next business day.
- Hose:
- 3/4"
- Flange:
- 1-3/4"
- Max Hull Thickness:
- 2-1/2"
$9.84 $8.99 -
Beckson Marine Clipper Clips 7/8-1-1/8 2/Pk Clp-1
Beckson Marine
$10.39 $9.41Beckson Marine Clipper Clips 7/8-1-1/8 2/Pk Clp-1Ideal for storing boat hooks, mops, gaffs, flashlights, tools and a variety of accessories. All use 1/8" holes on 3/4" centers.- Part Number:
- 35-CLP1
- Availability:
- In Stock - Ships same or next business day.
- Fits:
- 7/8" - 1-1/8"
- Color:
- Black
- Pack:
- 2
$10.39 $9.41 -
Sea-Dog Line Lift Handle Lrg. Stainless 221810-1
SEA-DOG LINE
$13.50 $12.09Sea-Dog Line Lift Handle Lrg. Stainless 221810-1Stamped 304 stainless steel. Carded.- Part Number:
- 354-2218101
- Availability:
- In Stock - Ships same or next business day.
- A:
- 2-9/16"
- B:
- 2-3/16"
- C:
- 7/16"
- D:
- 1/32"
- E:
- 1-1/2"
- Fastener:
- #8 FH
$13.50 $12.09 -
Attwood Marine Gas Spring 7.5X5.4C 30Lb Sl31-30-5
Attwood Marine
$31.33 $19.99Attwood Marine Gas Spring 7.5X5.4C 30Lb Sl31-30-5 Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117,...- Part Number:
- 23-SL31305
- Availability:
- In Stock - Ships same or next business day.
- Extended:
- 7.5"
- Compressed:
- 5.25"
- Stroke:
- 2.25
- Socket:
- 10mm Composite
- Force:
- 30 lbs.
- Rod:
- 8mm
$31.33 $19.99 -
Groco Basket-304 SS 3.1 x 12.0 Bs-16
Groco
$98.00 $69.99Groco Basket-304 SS 3.1 x 12.0 Bs-16 For 932-, ARG-, SA- & VD- series strainers.- Part Number:
- 34-BS16
- Availability:
- In Stock - Ships same or next business day.
- Description:
- Basket
- Fits:
- VD2000
- Pipe:
- 2"
- Size:
- 3.1" × 12.0"
- Screen:
- 304 S.S.
$98.00 $69.99