Hardware

1/2" NPT x 1/2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

2" NPT x 2" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

3/4" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

Rule Bilge Pump-500gph 24V 25Da24 Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. Higher Flow optimized impeller to provide greater flow at the same amperage Built-in Thermal Cut-Off (TCO) Back Flow...

Sea-Dog Line Deck Fill Cap-Blue (Water) 357017-1

Seachoice 60 Deg Rct Base Fitng-7/8-Cpz 37901 Polished • 1/4" - 28 cup-point set screws included • Pre-drilled for four #10 screws • Base: 3" x 1-3/4"

Attwood Marine Cleat-Fold Down Dock 6" 12048-4 Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade...

2" NPT x 2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

ARG-1003 Sight Glass Fits ARG-1000Sight glass fits the ARG-1000.

ARG-503 Sight Glass Fits ARG-500 Sight glass fits the ARG-500-S 1/2" NPT strainer.

Sea-Dog Line Cl203 Clam Cleat Junior 002030-1 Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.

Sea-Dog Line Nylon Flexible Door Catch 227023-1 Injection molded nylon/stamped 304 stainless steel. Nylon and stainless steel spring clip guarantees ease of alignment and durability in use. Comes complete with nickel plated brass adjustable door strike.

Seachoice SS Lifting Eye W/O Cleat 30231 Stainless steelTapped for 5/8" threaded connecting rodMaximum vertical load 3000 lbsIf used for overhead lifting, both Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed.

Attwood Marine Gas Spring Bracket 2H Flat 2/Pk Sl40SSp3-7 Mounting bracket: pem type: Ball 10mm. direction forward.

Attwood Marine SS Scupper Valve 66553-3 Rugged stainless steel contruction. Backed by Attwood's trusted Lifetime Warranty! Scupper flap is tough neoprene rubber with a molded V to reduce back wash comes with a silicone gasket Cast from certified...

1-1/2" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

Attwood Marine Cowl Vent 3 Surface Mount/Zamak 1364A3Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non...

Attwood Marine Gas Spring 20X11.75C 20Lb Sl34-20-5 Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117,...

Attwood Marine Gas Spring 7.5X5.4C 40Lb Sl31-40-5Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117,...

Beckson Marine Clipmate Holder 7/8-1-1/8 Whit Cm-1Made of marine plastic. Holds boat hooks, bilge pumps, oars, flashlights, and chart tubes. Stainless steel screws included.