Hardware

Seachoice Thru Hull W/SS Cover-1 90 Deg 50-18551 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Attwood Marine Thru Hull SS 1-1/2" 66551-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

BS-8 Stainless Steel Basket - 3.1" x 12.4" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-2000 SA-2000

Sea-Dog Line Deck Fill 1-1/2 Diesel with Lock 351321L-1   Investment Cast 316 Stainless steel Prevent fuel thefts Includes two keys The cap threads are 1-1/4" - 11-1/2.

Shurflo Elbow Fitting 1/2 x 1/2 244-3926 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Shurflo Problaster II Deluxe 4.0 4248-153-E09 Perfect for tough washdown applications, such as fish box, scaling and anchor chains. These rugged self-priming pumps deliver high lift, can run dry without damage, won't overheat with extended use, and...

2" NPT x 2" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

3/4" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

Sea-Dog Line Cl203 Clam Cleat Junior 002030-1 Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.

Sea-Dog Line Hatch Cover Pull Round SS with Gskt 221842-1 Stamped 304 stainless steel. Carded.

Sea-Dog Line SS Cowl Vent with Bl Plast Base 331320-1 Stainless with a plastic base. Use with 3" hose and #8 flat head fastener.

Seachoice Gas Fill With Vent (Black) 32061 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Attwood Marine Cleat-Fold Down Dock 6" 12048-4 Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade...

Attwood Marine Pontoon Gate Latch 11404-6 This durable lock set is a complete replacement kit for your pontoon's gate latch. Universal sizing fits square frames of 1", 1-1/8", and 1-1/4" on both left- and right-hinged gates. Secure closure stabilizes...

1-1/2" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore...

2" NPT x 2" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

Seachoice SS Lifting Eye W/O Cleat 30231 Stainless steelTapped for 5/8" threaded connecting rodMaximum vertical load 3000 lbsIf used for overhead lifting, both Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed.