Hardware

Sea-Dog Line Bilge Pump Switch Panel with Brkr 423040-1 Injection molded ABS. This deluxe version comes with a 3 way switch allowing both automatic and manual switching of bilge pump. Includes 20 amp. circuit breaker.

Sea-Dog Line Deck Fill Cap-Blue (Water) 357093-1

Sea-Dog Line Galvanized Cleat - 6 Inch 40106Hot dipped galvanized iron.

Sea-Dog Line Gooseneck Door Hook 5" Chrome 222090-1Cast brass gooseneck 5" door hook and swivel with chrome finish. Use #6 fasteners. Carded.

Sea-Dog Line Ring Pull Latch Spring Loaded 221920-1 Investment cast 316 stainless steel. Fastener: #8 FH. Carded.

Seachoice 5/16-18 x 6 Phl Flt M/S SS 5/Bg Sc5019 18-8 Stainless Steel.

Seachoice Bilge Pump Control Switch 19391 Lighted stainless steel 3-way bilge pump switchWhen using the Momentary-On switch, bilge pump can be operated bypassing the automatic float switch - switch automatically returns to "OFF" when releasedCan be used...

Taylor 10Mm Ball Stud SS 1892Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Attwood Marine Dock Cleat Iron 8 12102-1Galvanized finish. Two holes for required fasteners.

Attwood Marine Gas Spring 90 Lbs. 7-10.02" Sl36-90-5Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117,...

Attwood Marine Pontoon Gate Latch 11404-6 This durable lock set is a complete replacement kit for your pontoon's gate latch. Universal sizing fits square frames of 1", 1-1/8", and 1-1/4" on both left- and right-hinged gates. Secure closure stabilizes...

Beckson Marine 8 White Pry-Out Deckplate Dp81-WAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves,...

Bomar Deck Plate 10"locking Stark White G844W Has UV stabilized resin and an O-ring seal. Locking center.

1-1/2" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps...

1-1/4" NPS NPT Combo XL Bronze Thru Hull Features: Extra long NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 2" Available with or without nut Stainless Steel models available

2-1/2" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available  

3" NPT Bronze 45 Degree Pipe to Hose Fitting Features: 45 degree Male NPT x Hose connection C83600 Bronze Sizes from 3/4" to 3" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1-1/2" Thru Hull  Features: Mount ring design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting...

BS-10 Stainless Steel Basket - 3.1" x 13.3"GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.Fits:ARG-2520932-2000

Johnson Pump Bilge Pump 1250 gph 1-1/8"hos 42123 Compact, all-in-one motor/impeller unit. Extremely energy efficient. Water-cooled motor for long service intervals. 500-1000 GPH pumps include a straight and 90&deg, Dura-Port. Removeable check valve