Hardware

Attwood Marine Quick Disconnect Seat Mount 6 1/4 11602D1 Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.

Attwood Marine Thru Hull SS 1" 66548-3 Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Bomar Extruded Screen Ns2039Ex Screens fits N0039-10FX, N0039-10FXN, N1039-10A, N2039-10A hatches.Trim ring fits N0039-10FX, N0039-10FXN, N06399-10FX, N1039-10A, N2039-10A hatches.Screen and Trim Ring sold separately.

Bomar Inspection Hatch 12-1/2X15-1/2 OFF WHITE G881222 Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

1-1/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

1-1/4" NPT x 1-1/2" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2-1/2" NPT Bronze Full Flow Pipe to Hose Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

3" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded...

3/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

3/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

ARG-1000 Series 1" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/4"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

1-1/4" FNPS 90 Degree Bronze Pipe to Hose Fitting Features: 90 degree Female NPS X Hose connection C84400 Bronze Sizes from 3/4" to 2-1/2" Standard Flow Note- C84400 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...

Johnson Pump 3/4 Thru Hull 90Deg. 75035-00 Fittings are molded of tough acetal resin so they will not rust, corrode, discolor nor are they susceptible to electrolysis.

Johnson Pump 5.2 gpm Wash Down Kit 70 psi 64534 New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5...

Perko 3/4 Water Strainer 0493005Plb Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize...

Perko Chrome Flush Pull 1110Dp0Chr Chrome plated zinc. #6 Fasteners.

Perko Combo Gas Fill & Tank Vent-Wh 0542Dpgwht Polymer body, cap and strap. Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Sea-Dog Line 1"-60Deg SS Round Rail Base 280601-1 Cast 316 stainless steel. Carded.