Hardware

Attwood Marine 6 Popup Cleat Stud Mount/Pkg-SS 66516-7This cleat recesses flush to the deck for a clean, contemporary look. Two mounting styles include an exclusive stud-mounted cleat (Patented). Water-resistant cleat recesses into cast body, and is...

Attwood Marine Deck Fill 1.5 Gas 66406-5316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck. 2 year warranty.

Attwood Marine Padlock Eye Clamp Flush Mount/Zmk 2012A3Chrome-plated zinc. Ideal for tackle boxes, ice boxes, dock boxes, hatches or motor box clamps. Rugged secure locking device with easy flip handle. Pre-drilled with four mounting holes for #8 screws...

Attwood Marine Waterbuster Cordless Pump + 4140-4This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three...

Beckson Marine 4 O Ring F/Screw-In Deck Plate D4S-G

Beckson Marine 6 White Pry-Out Deck Plate Dp61-WAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Clipmate Holder 2 White Cm-2Made of marine plastic. Holds boat hooks, bilge pumps, oars, flashlights, and chart tubes. Stainless steel screws included.

Bomar Hatch Low Pro 18-1/2 x 18-1/2 N108010AStyle A-external hinge. Anodized heavy-duty aluminum frames. Heavy-duty acrylic top. No sharp corners to snag lines or sails. Heavy-duty hinges, quick acting, adjustable tie down dogs. Locked vent position.

1-1/2" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps...

1-1/4" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

1-1/4" NPT x 1-1/2" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

1/2" NPT Bronze 3-Way Valve  Features: 3-way valve operates logically - The handle points to the direction of flow Center position is "off"  Handle rotates a full 180°. Mount foot included. Full flow.   Stainless steel handle and...

1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

2-1/2" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

3/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

2" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded Sight Glass...

Bronze Clam Shell Style Hull Strainer f/Up To 1-1/2" Thru Hull  Features: C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow Type: STD Mounting Ring Incl.: No Max T-Hull: 1-1/2" Perf Dia.:...

Bronze Round Hull Strainer with Access Door for Up To 1" Thru-Hull Features: Patented access door design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter holes. Designed for systems where forced flow is not needed or wanted. ...

Spanner Wrench/Deck Plate Key  Features: Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes.  Opens to service deck plates or strainer caps with key holes up to 7" apart.  Hangs conveniently near the strainer(s) location...

Jabsco Repair Kit 581071000