Hardware

Beckson Marine Bilge Pump 30" with 32" Hose 230PfSelf-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine Deckplate 4" Black Non-Skid Dp42BBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...

Beckson Marine Deckplate 8" Black Non-Skid Dp82BBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...

Beckson Marine Handy-Mate Hand Pump 216PcFor oil, diesel fuel, water, boat, home and car. For routine pumping jobs and more. Use for bilges, sump tanks, crankcase oil changing. Comes with kit of tubes, hoses, reducing foot and adapter. Tough marine...

Beckson Marine Port Opening Black/Smoke 5 x 12" Po512Dbs20Designed primarily for cabin sides with excessive angles and where other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45°, from...

Beckson Marine Port Opening White/Clear 7 x 14" Po714Dwc20Designed primarily for cabin sides with excessive angles and where other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45°, from...

Beckson Marine Vinyl Trim 100 Ft-White T-3Self-locking vinyl trim. No rivets or adhesive necessary. Serrated metal reinforced self-locking insert. Just snap on and stays put. Excellent for rough edges of fiberglass and wood. Will bend into a 4" circle.

Bomar Gasket 9/16X5' F/Cast Hatches P100525

Bomar Hatch Pack with Trim Ring/Screen G9951111This low profile molded hatch has quick action dogs, collet arm, vent position and smoked acrylic lens. Trim ring & screen included.

Bomar Port SS 5X12 with .25" Trim Ring H655203Stainless steel portlights passage series. Smoked acrylic lens, complete with trim ring and screen. Deep drain angle, no visible exterior screws. Easy exterior installation.

Bomar S516 SS Port with Scrn S5166SSNo visible exterior screwsLarge viewing areaDeep drain angleAdjustable quick dogsSmoked lensComplete with trim ring and removable screen

Bomar Spr Riserarm(Except 130/520) P10000

Bomar Tie Down Dog P10009

1" FNPS 90 Degree Bronze Pipe to Hose Fitting Features: 90 degree Female NPS X Hose connection C84400 Bronze Sizes from 3/4" to 2-1/2" Standard Flow Note- C84400 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

1" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The...

1" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

1-1/2" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls...

1-1/4" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

1-1/4" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet...

2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline