Hardware

Attwood Marine Three-Way Pump Switch 7615A3For use on automatic pumps or pumps with float switch. Water resistant rocker switch. Not external ignition protected. 1/4" spade terminals.

Attwood Marine Thru Hull SS 5/8" Short 66540-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Beckson Marine 4 Screw-On Vent Hose Adapter Sa-4 Designed for attaching ventilation hose to deck for use with Beckson "C" series vents.

Beckson Marine Deckplate 4" Screw White Dp44WBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...

Beckson Marine Deckplate 6" White Pry Nonskid Dp65WAn extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off...

Beckson Marine Deckplate 8" White Screw Nonski Dp84WBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an...

Bomar Hatch 10 x 20 White G81020WFlush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

Bomar Hatch Access 8X12 Cream G781222Molded of high impact UV stable polypropylene. Hatch is low profile for floor mounting. No screws are visible from the exterior. Hatch opens 180°. Has a strong lid with support bars and a double gasket for optimum...

Bomar Hatch Hi-Pro 20-3/16 x 20-3/16 N203910Ax Style A-external hinge. Anodized heavy-duty aluminum frames. 1-1/2" height above deck. Extra high sealing lip on base. Heavy-duty acrylic top and heavy-duty hinges. No sharp corners to snag lines or sails...

Bomar Hatch Low Pro 13-1/8 x 18-1/2 N102910AStyle A-external hinge. Anodized heavy-duty aluminum frames. Heavy-duty acrylic top. No sharp corners to snag lines or sails. Heavy-duty hinges, quick acting, adjustable tie down dogs. Locked vent position.

1" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

2" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...