Hardware

Beckson Marine Deckplate 8" White Screw Nonski Dp84WBeckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an...

Beckson Marine Port Opening White/Clear 5 x 12" Po512Dwc20Designed primarily for cabin sides with excessive angles and where other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45°, from...

Bomar Deck Plate 10"locking Stark White G844WHas UV stabilized resin and an O-ring seal. Locking center.

Bomar Gasket 3/8X5' F/Extruded Hatc P2000255

Bomar Hat 161/2 966 Black with Tr & Scr G9661111This low profile molded hatch has quick action dogs, collet arm, vent position and smoked acrylic lens. Trim ring & screen included.

Bomar Inspection Hatch 12-1/2X15-1/2 G881222 Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

1" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

1" NPT x 1-1/8" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

2" NPT x 2-1/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

2-1/2" NPT Bronze Inline Valve Features: Female NPT Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable handle rotation. Handle has square...

3" NPT Bronze Inline Valve Features: Female NPT Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable handle rotation. Handle has square hole to...

3/4" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug...