Plumbing Fittings

Non-Metallic Strainer Cap Fits ARG-500 & ARG-750 Features:  Fits ARG-500 & ARG-750 Cap, Plastic   Does not come with O-rings Order O-rings Part #(2-135) & (2-228) Separately

Seachoice 4-Long Thru-Hull 3/4 -White Pla 18161 Extra long molded high impact white plastic with broad flangeDesigned for installation where thick transoms or side walls require up to 2-1/2" long threadNot recommended for use below the waterline.

Shurflo Straight Fitting 1/2 x 3/4 244-2946 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Groco Basket-304 SS 3.1 x 12.0 Bs-16 For 932-, ARG-, SA- & VD- series strainers.

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/8"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Sea-Dog Line Deckfill 1-1/2" Water No Key 357033Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel; &...

1-1/4" NPT x 1-1/4" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in...

Seachoice Large Self Bailing Scupper 18281 Automatically seals and drains self bailing decksMade of polycarbonate materialSolid polyethylene ball and PVC seal mounts on transom above water line18271 and 18291 designed to retrofit Model 18261

Bronze Pipe Nipple - 1/2" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

Shurflo Straight Fitting 1/2 x 1/2 244-2926 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

1/2" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

2" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to...

Groco Strainer Repair Kit (Sa1000) Sa-2 For SA series single strainers.SA1 Includes: 2 #9R gaskets, S-64-A gasket & 500-K washerSA2 Includes: 2 #8R gaskets, S-751-A gasket & 500-K washerSA3 Includes: 2 #10R gaskets, S-86-A gasket & 504-F...

Perko Spare Cap with Chain 0540Dpg99A Replacement chrome plated bronze cap fits 540 or 541 series vented fill for 1-1/2" hose.

Attwood Marine SS Scupper Valve 66553-3 Rugged stainless steel contruction. Backed by Attwood's trusted Lifetime Warranty! Scupper flap is tough neoprene rubber with a molded V to reduce back wash comes with a silicone gasket Cast from certified...

Attwood Marine Thru Hull 1-1/2" White 3875-3 Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available

3/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

Backing Block for 1-1/4" & 1-1/2" Seacocks Features: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure...