Plumbing Fittings

Perko Garboard Drain Plug 0714Dp1PlbCast bronze flange and brass plug. Flange O.D. is 2". Pipe size is 1/2". UL Listed.

Sea-Dog Line Washdown Water Outlet SS 513120-1 Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.

Attwood Marine Brass T-Handle with O Chain 7526A7 Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

1-1/4" NPT x 1-1/2" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" NPT x 1-1/2" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2-1/2" NPT Bronze Full Flow Pipe to Hose Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

3" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded...

3/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

3/8" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole...

BP-1 Poly Basket - 1.9" x 5.2" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/4"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Johnson Pump 3/4 Thru Hull 90Deg. 75035-00 Fittings are molded of tough acetal resin so they will not rust, corrode, discolor nor are they susceptible to electrolysis.

Perko Combo Gas Fill & Tank Vent-Wh 0542Dpgwht Polymer body, cap and strap. Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Sea-Dog Line Brass Tee Handle Drain Plug - 520080

Sherwood Pump P Seastrain 1 (Bracket=14239) 18005 Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl...

Attwood Marine Thru Hull SS 1" 66548-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

1" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible handle...

1" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

G 1" BSPP Bronze 90 Degree Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread 90 degree Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1 Certified Note- C83600 bronze...