Alpha Gen 1 Routine Maintenance

Genuine OEM Mercury High-Performance SAE 90 gear lube. The lubricant Mercury engineers for sterndrive and outboard lower units. Clean, consistent protection is what keeps gears and bearings alive...

OEM Quicksilver High-Performance SAE90 Gear Lube Clean oil is essential in reducing friction and preventing damage to internal components, providing many years of engine life. Engineered for...

SE106 Install Kit for all SEI Gen 1 drives

OEM MerCruiser Drive Install Gasket Kit 27-94996Q 2 This kit contains the six gaskets for installation of the bell housing of MerCruiser R, MR and Alpha One Gen II (serial number 6225577 and above,...

MerCruiser Alpha Gen 1 Water Pump Impeller Housing KitThis is the complete kit with everything you need to service your Alpha Gen 1 Out-drive.This kit includes:impeller, gaskets, wear plate, and...

4 Pack OEM MerCruiser Gearcase Drain Screw Washer 12-19183Q02 The Quicksilver Drain Screw gasket is used with the 3/8‑16 drain/fill screw found on all MerCruiser and most Mercury/Mariner outboards...

8M0058389 Lower Unit Gear Lube Drain and Fill Hole Screw And Seal - Magnetic Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 8M0058389 is used with 3/8 - 16 drain/fill hole screw on all...

OEM Quicksilver/Mercury Water Pump Up Repair Kit 46-96148Q8 This extensive kit fits Mercury and Mariner outboards from the 65 hp (4-cylinder) through V-6 outboards with short vane impellers. It also...

OEM Mercury / MerCruiser Alpha Out Drive Install Gasket Kit 27-94996T2 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided via Mercury may not always...

OEM Quicksilver/Mercury Continuity Kit- Gen 2/Bravos 99940A2 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided via Mercury may not always be...

OEM MerCruiser Gearcase Drain Screw 10-79953Q04 Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser stern drives, Mercury...

OEM Quicksilver/Mercury Flo-Torq 2 Drive Sleeve  835290Q 1 Flo-Torq II hub kit 835290Q1 is for use in Mercury or Quicksilver propellers for 75 hp Mercury two-cycle outboards (1984 and newer), 90 hp...

OEM Quicksilver/Mercury Anode Kit- Trim Tab- O/B  97-31640Q 4  97-31640T 4 For Mercury/Mariner outboards 35 hp and above plus all MerCruiser Drives except Bravo Drives. After installation, check for...

OEM Quicksilver/Mercury Short Vane Water Pump Repair Kit  47-89984T 5 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided via Mercury may not always be...

OEM MerCruiser Prop Tab Washer 14-816629Q Tab washer 816629Q is for use on Mercury and Mariner 40 hp through 60 hp Bigfoot 40stroke outboard, 75 hp through 300 hp two-cycle and 4-stroke outboards...

MerCruiser Prop Nut Kit 11-52707Q 1 Propeller nut kit 52707Q1 includes two nylock propeller nuts and four tab washers. See your owner's manual for installation instructions, the Flo-Torq hub, thrust...

Martyr Anodes Anode Kit-Mc Alpha I Gen I Al Cmalphagen1KitaIncludes:CM31640 Trim TabCM55989 Gimbal Housing (2)CM821631 Gimbal Housing

OEM MerCruiser Prop Washer 12-31211Q03 Aft washer 31211Q03 can be used on propellers using the Flo-Torq 1 rubber hub on 135 hp through 275 hp Mercury and Mariner V-6, two-cycle outboards and...

OEM Quicksilver/Mercury Alpha 1 & O/B Impeller 47-89984T4 For Mercury Optimax 2.5L Non-pro models (serial number 1B227000 and above). See your owner’s manual for replacement schedule. The...

MerCruiser Prop Thrust Washer 12-835467Q01 Thrust washer 835467Q01 can be used with Mercury Flo-Torq hubs on 40 hp through 60 hp Mercury and Mariner Bigfoot 4-stroke outboards, 75 hp through 125 hp...