Plumbing

Johnson Pump Portable Washdown 64736-00Kit includes everything you need to washdown your boat or RV. It uses any available water (fresh or saltwater). The efficient pump is rated at 70 psi. CE Rated and ignition protected. Kit includes: Self-collapsing...

Johnson Pump Pump 3.5gpm 24Vdc 70psi Wd 10-13399-04Whisper quiet and pulsation-free, the Aqua Jet five-chamber diaphragm pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar,...

Johnson Pump Pump- 3.5gpm 12Vdc 70psi Wd 10-13399-03Whisper quiet and pulsation-free, the Aqua Jet five-chamber diaphragm pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar,...

Johnson Pump Switch Vacuum with Nipple 09-45053For automatic shut off operation to prevent pump damage.The vacuum switch works with all self-priming impeller pumps and should be used for bilge pumping/emptying of tanks to prevent the pump from dry...

Johnson Pump Vacuum Viking 32 12V 10-13373-07Viking Power Vacuum diaphragm pump has double check-valves and can therefore also be used in vacuum toilet systems. Although powered by an electric motor, this pump can also be cranked by hand in case of an...

Johnson Pump Vented Loop 1-1/2 814723703Eliminates fluids siphoning from one tank to another. A top mounted valve allows air to enter when not in use and seals as fluids pass through. Ideal for use in toilet systems.

Johnson Pump Viking Compact Hand Pump 10-24800-01This rugged yet sleekly designed, single-chamber diaphragm pump provides first-rate performance and is a snap to install. It can be fitted in minutes from one side of the bulkhead with just four screws,...

Johnson Pump Water Pressure Regulater Valve 40057Reduces city water pressure to 40-50 psiCorrosion resistant bronzeStandard 3/4" GHT thread for easy hook up

Drain Tube Flanging Tool- 1.25"  02070400    Designed for use with Snap-Tite, Turn-Tite and Trail'n Bail plugs. Includes required flanges for drain tube installation

OPEN BOX Attwood Marine Tsunam 500 Cartridge Pump 4606-7 Tsunami bilge pumps are dependable and long-lasting. Easy cartridge installation. Cartridges are replaceable and interchangeable. Housing made of rugged, glass and mineral filled polymer that...

OPEN BOX / Clearance Seachoice Hand Bilge Pump - 8 Gpm 19151 Self-Priming and easy to clean • Made of rust and corrosion resistant plastic • Packed in poly bag with rigid header card

OPEN BOX Seachoice Bilge Pump Universal 3700 Gph 19321 Meets ABYC and USCG Standards • Removable housing for easy cleaning • Fully submersible • Anti-airlock protection • Ignition...

Perko 1 1/2 Gas Pipe Deck Plate 0528DpgchrCast bronze. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" and 1-1/2" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.

Perko 1 1/2 Seacock Body 0805008PlbBall valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. UL Listed.

Perko 1 1/2 Thru Hull Connection 0350008DppThese fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"...

Perko 1 1/4 Seacock Body 0805007PlbBall valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. UL Listed.

Perko 1 Pipe To Hose Adapter 0076Dp6PlbCast bronze. Meets requirements of USCG safety standards. UL Listed.

Perko 1 Scoop Thru Hull with Nut 0065Dp6PlbCast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed.

Perko 1 Thru Hull Connection Chr 0350006DpcThese fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"...

Perko 1 Thru Hull Connection Plb 0350006DppThese fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8"...