Autopilots

Need to replace a split connector? Our replacement split connector helps you easily route cables during installation and eliminates the need to drill large holes in your boat. WARNING: This product...

Whether you're going for salmon, trout, walleye or some other species or just taking your sailboat out of the marina, your Reactor 40 kicker autopilot can help you maintain heading hold and route to...

Reactor 40 Mechanical/Retrofit/Solenoid Corepack without GHC 20 010-00705-48 The Most Responsive Autopilot System on the Water Solid-state 9-axis Attitude Heading Reference System...

GRF™ 10 - Rudder Feedback SensorCompatible DevicesPair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.The GRF 10 uses a...

Actuator Power Cable10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other...

CCU Extension Cable 5MMount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable. WARNING: This product can expose you to chemicals...

Rudder Feedback Cable5" x 5" x 1" rudder feedback cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other...

CCU Extension Cable 15MMount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable. WARNING: This product can expose you to chemicals...

SeaStar Fittings Kit Fittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems.  What's In The Box? 3 pieces of 1/4” NPT male to marine tube male (3/8” compression)...

1.2-Liter Pump Kit 010-00705-64 Use Garmin's 1.2 Liter per minute (0.32 gallon per minute) pump kit with your Reactor 40 system to pump hydraulic fluid to the steering cylinders and steer the boat...

2-Liter Pump Kit 010-00705-63 Use Garmin's 2.0 Liter per minute (0.53 gallon per minute) pump kit with your Reactor 40 system to pump hydraulic fluid to the steering cylinders and steer the boat...

Autopilot Check Valve KitThis check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow...

Compact Reactor™ 40 Hydraulic Autopilot Starter Pack 010-00705-06 Ideal Entry-level Autopilot System Includes Compact Reactor 40 CCU, ECU, pump and other autopilot components needed to add to...

Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 50 & Shadow Drive™ Technology Pack with GHC™ 50 & Shadow DriveEvery Captain Needs a Co-Pilot. Designed for boats less than 25’ long, this...

Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 50 Instrument Pack with GHC™ 50Every Captain Needs a Co-Pilot. Designed for boats less than 25’ long, this entry-level, Compact Reactor 40 hydraulic...

ECU Power CableProvide power to your electronic control unit (ECU) with our ECU power cable. Simply wire the ECU power cable to your boat battery as one of the last connections made during GHP 10...

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5mProvide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the...

GHP SmartPump v2 010-00705-62 Put an end to guessing which pump size will work with your particular boat. One SmartPump works for most boats and applications. You know you have the right pump for...

GRF™ 10 Extension Cable (15M)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15M to your cable. WARNING: This product can expose you to chemicals which are known to...

GRF™ 10 Extension Cable (5m)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5m to your cable. WARNING: This product can expose you to chemicals which are known to the...