Dock Hardware

Tiedown Engineering Female T Connector Ingin 26407G. Bolts to side of dock to attach fingers and ramps.

Tiedown Engineering Female T-Connector 26528G. Bolts to side of dock to attach fingers and ramps.

Tiedown Engineering HD Deck Plate 26416Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed...

Tiedown Engineering HD Inside Corner 2" Inein 26405E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching.

Tiedown Engineering HD Inside Corner Indin 26403D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering HD Outside Corner (End) Incin 26402C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners.

Tiedown Engineering HD Outside Corner (Female) Ina 26400A. Two 1/2" welded tabs. Use with a male outside corner.Each leg is 10"L x 5"H.

Tiedown Engineering HD Pipe Holder Hoop 26412R. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate...

Tiedown Engineering HD Plate Hoop Roller 26415Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12"...

Tiedown Engineering Hdinside Corner 3" Inein 26404E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching.

Tiedown Engineering Inside Corner 10.5 26424D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner 26417D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner 26524D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner 8.25 26430D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner Sq Holes 26401D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Roller Ramp Bracket 1 Pr/Pk 264315" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets

Tiedown Engineering Internal Pile Holder with Rolrs 26434Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".

Tiedown Engineering Lag Bolt with Wash 3/8X 2-8/Bg 24287Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Male T Connector 26427H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.

Tiedown Engineering Male T Connector Inhin 26408H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.