RH53515 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H

RH53130  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575

RH52815 Degree Medium Vinyl Rubber Insert for RH529H, RH529HS, RH5329H, RH529XS

RH52630 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325RH52XS 

RH5160 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS

RH5110 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL 

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

RH5930Stainless Steel Backing Plate for 0°, 15° & 30° Heavy Rod Holders.

Rod Butt Extender for Standard & Heavy Swivel Base Rod HoldersComes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod holders and will now fit in heavy swivel base rod holders...

PVC Drain Cap f/Heavy Rod Holders 1/4" NPTPVC Drain Cap for Heavy Rod Holders - 1/4" NPT for hose barb

Universal Backing PlateThis is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale.The backing plate is 3mm/0.1" thick.

Rotating Rod Holder 30 & 15-Degree Drain AttachmentThis is the Drain Attachment for the 30 & 15 degree rotating rod holder, made of 316 stainless steel and a brass swiveling pipe clamp.Specially designed by Exploding Fish to complement...

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 30-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a...

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 15-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a...

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 0-DegreeThese are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. They are fully engineered and made of a...

Replacement Liner for 70 Series - WhiteReplacement liner for 70 series in-gunnel and clamp-on rod holders. This UV-resistant vinyl liner protects rods.Features:Recessed liner (doesn't come to the top of the tube)Made of white vinyl material

Drop-in SwivelDrop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance...

Backing Plate for 80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking...

70 Series Wrench for Screwless Rod Holder Installation Crowsfoot WrenchFeatures:For use with 70 Series Screwless Rod HoldersAllows for installation in locations with limited spaceThis product may not be returned to the original point of purchase. Please...