West System Products

A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White Color. Color:...

410 Microlight is the ideal low-density filler. When you blend it with epoxy, it creates a light, easily-worked epoxy fairing compound. It’s especially suited for fairing large areas. We formulated Microlight to mix into epoxy more easily than...

879-2 and 879-10 are the same tough, finely woven nylon fabric (often called peel ply). It is used to separate the breather and vacuum bag from the laminate in vacuum bagging operations. Excess epoxy bleeds through and is peeled from the cured...

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with...

803 Glue Brushes are handy, disposable ½” x 6″ glue application brushes with a hollow metal handle. These brushes, which are also referred to as “acid brushes” are extremely useful in a wide variety of small epoxy bonding...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Versatile West System 9 oz woven E-glass fabric tapes, with bound edges, are ideal for reinforcing chines, hull/deck corners, and similar structural applications. When bonded with WEST SYSTEM Epoxy, they provide additional tensile strength to resist...

Versatile West System 9 oz woven E-glass fabric tapes, with bound edges, are ideal for reinforcing chines, hull/deck corners, and similar structural applications. When bonded with WEST SYSTEM Epoxy, they provide additional tensile strength to resist...

Breather Fabric is a lightweight, polyester blanket that provides excellent air passage within the vacuum envelope while it absorbs excess epoxy. 881-10  Breather Fabric, 45″ wide x 10 yd roll   What is vacuum...

A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler...

These disposable gloves are made of lightweight, seamless neoprene. They are more chemically resistant than latex gloves. They provide excellent protection while retaining good fiber sensitivity and dexterity and they are more puncture resistant than...

These disposable gloves are made of lightweight, seamless neoprene. They are more chemically resistant than latex gloves. They provide excellent protection while retaining good fiber sensitivity and dexterity and they are more puncture resistant than...

209 Extra Slow Hardener is formulated for use with WEST SYSTEM 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately...

An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. Not recommended for long-term...

An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. Not recommended for long-term...

West System G/Flex Epoxy Kit 650K Liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150;000 PSI, it is a bit more flexible than standard epoxies and...

423 Graphite Powder is a fine black powder that can be mixed with epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a low-load, low-speed bearing surface, as a coating on...

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color Size: 12oz

Fairing filler mixtures cure to light, easily sandable material that is generally used for cosmetic or surface applications like shaping, filling or fairing. 407 Low-Density filler is a blended micro balloon-based filler used to make fairing putties...