Hardware

Attwood Marine Dock Cleat 6" Iron 12100L3Galvanized finish. Two holes for required fasteners.

Attwood Marine Drain Plug S.S. T-Handle 7518A3Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Attwood Marine Gas Spring Bracket 2H 90D 2/Pk Sl50SSp3-7Mounting bracket: pem type: Ball 10mm. direction forward.

Attwood Marine Shower Pump System 750 Gph 12V 4143-4This sump box features an air vent to prevent air locks, slotted mounts for easy installation & removal, a straight mesh filter to provide easy removal for cleaning and pre-installed inlet fittings...

Attwood Marine Thru Hull SS 1-1/4" 66550-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Beckson Marine Clip Mate 11/16" To 7/8" 2/ Cm34Made of marine plastic. Holds boat hooks, bilge pumps, oars, flashlights, and chart tubes. Stainless steel screws included.

Beckson Marine Deckplate 4" Screw White Dp44W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...

Beckson Marine Deckplate 4" White Non-Skid Dp42W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative...

Bomar Gasket 9/16X10' F/Cast Hatche P10055

Bomar Hatch Inspection 10 1/4X14 1/4 G871122 Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

Bomar Inspect Hatch 18-1/2X20-3/16 G8161822Flush mounting, molded low profile hatch is fully gasketed with UV stabilized resin and non-skid surface. Comes with "T" handles for easy operation and stainless steel hinge pins.

1-1/2" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

1-1/4" NPS NPT Combo High Speed Pickup Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 3" Available with or without nut BSPP models...

1-1/4" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

3/4" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru...

ARG-500 Series 1/2" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

BM-2 Monel Basket - 1.9" x 7.2" Replacement Monel Raw Water Strainer Baskets are made of high-strength, corrosion-resistant Monel and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure...

BS-14 Stainless Steel Basket - 3.1" x 16.0" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-3025

Drain Plug with O-Ring for ARG Strainer Drain plug with O-ring for ARG Strainer. For Strainers older than 2008 use ARG-506.

Raw Water Strainer with #304 SS Basket Features: British Standard Pipe Parallel (BSPP) Thread Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS...