Hardware

Sea-Dog Line Brass Drain Tube - 1 In X 2 7/ 520230-1 Formed brass. 1" inside diameter.

Sea-Dog Line Brass Tee Handle Drain Plug - 520080

Sea-Dog Line Deck Fill Cap-Green (Diesel) 357091-1

Sea-Dog Line Hdpe Motorwell Drain Tube 520320-1Molded heavy-duty plastic. Carded.1-1/4" OD x 3/4" L - 2-1/2" L

Sea-Dog Line Push Button Rim Latch - Chrome 224300-1 Includes both strike plates. Plastic housing. Polished chrome finish brass button. Fastener # 6 RH.

Sea-Dog Line Replacement Plug And Handle 5200471 Die Cast Bronze.

Sea-Dog Line Snap #1 Brass Fixed Eye 139121-1 Sand cast brass.

Sea-Dog Line Stainless Coat Hook Single 671491-1 Investment Cast 316 Stainless.

Sea-Dog Line Stainless Impeller Puller - La 660020-1 Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.

Seachoice 5 1/2 Deg Fitng End In-7/8 -S 38471 Made of cast 316 stainless steel, polished • 1/4" - 28 cup - point set screw included • Pre-drilled for two #10 screws

Seachoice Bow Eye-3/8 x 3 7/16 -SS-(Bul 33600 304 Stainless steel •  • BOW EYES • 33601: 3200 lbspullFace plate: 3/4" x 2-1/4"ID 11/8" • 33631: 4800 lbspullFace plate: 3/4" x 3"ID...

Seachoice Butt Hinge- SS-2 x 3 2/Pk 34921 33891: Molded from fiberglass filled Black nylon with stainless steel pinVery sturdy and extremely lightweight. • 33901, 33911: 316 Stainless steel. • 33951: Polished 304 Stamped...

Seachoice Thru Hull W/SS Cover-1 1/4 St 50-18471 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Seachoice Nylon Drain Plug 18641 Black Nylon • 1" hole diameter • Use #10 screws

Seachoice Pry-Up Deck Plate - 6 White 39501 Easy to clean non-skid surfaceWater tight O-ring sealAcetone resistant polypropyleneRequires #8 fasteners.

Seachoice Transom Handle-6 -Cpz 37501

Shurflo 12 Volt Macerator 3200-001 Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with o-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual,...

Tiedown Engineering Dock Ladder Galvanized 5 Step 28275Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.

Trident Hose Clamps T-Bolt 1-1/8-1-1/4" 7201140Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Trident Hose Clamps T-Bolt 1-3/8-1-1/2" 7201120Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.