Plumbing Fittings

Seachoice Scupper Valve 18261 High impact fiberglass reinforced white plastic ring with rubber flap and gasketFor boats with self bailing cockpitsMounts on transom above water line.

Sea-Dog Line Nylon Drain Plug Bulk 520010 Designed with a molded-in-recess in the base, thus trapping the sealant in place and providing a more water-tight seal. 1" hole dia. #10 FH

Perko 1/2 Thru Hull Connection 0328Dp4Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline. UL Listed

Sea-Dog Line Stainless Drain Cover-2 1/2 In 331601-1   Stamped 304 Stainless Fasteners: #6 RH Vent Area .85 Sq. In.

BS-4 Stainless Steel Basket - 2.6" x 7.5" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-1210 SA-1000

BS-3 Stainless Steel Basket - 2.6" x 7.3" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.

Seachoice Drain Tube-1 1/4 x 3 -Brass 19091 Drain tube with .035" wallFor use in transom, motorwell, livewell or baitwell.

Perko Sealed Fill Cap w/VPR, Stainless Steel EPA Complaint Sealed Cap with Vacuum/Over Pressure Relief Valve  

Seachoice Drain Plug-1 1/4 -Snap-Brass 50-18871 Rugged construction for durabilityMount from inside transomBulk items come in reusable bucket. • Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. • Snap-Lock...

3/4" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole...

Seachoice Thru-Hull Conn-Black Plas-3/4 50-18151 Per ABYC "Safety Standards for Small Craft"Molded plastic with broad flange • Not recommended for use below the waterline.

Seachoice Drain Tube-1 1/4 x 4 1/2 -Plasti 19131 Durable plastic drain tube for motorwell, livewell or baitwellAdjusts to fit bulkheads from 2" to 4-1/2"Use 1" drain plug to close opening (18801, 18821, 18891 or 18901).

Attwood Marine Scupper 1-1/2 Thru Transom 3881-1 The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and...

Attwood Marine Scupper Valve Can Be Used As 3876-3 Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent...

1/2" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole...

1/2" NPS NPT Combo Scoop Thru Hull Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut BSPP models available

2-1/2" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...

Non-Metallic Strainer Cap Fits ARG-1000 & ARG-1250 Features: Non-Metallic Strainer Cap  Fits ARG-1000 & ARG-1250

ARG-1253 Sight Glass Fits ARG-1250 Sight glass fits the ARG-1250.

Beckson Marine Drain Plug 1" Black Dp10-B A screw-type with patented self-cleaning thread design. Ideal installation for transom of small boats, fish wells, coolers, ice chest, water tanks, etc. Part should be mounted in 1" ID hole with two stainless...