Plumbing

Sherwood Pump P Seastrain 1 (Bracket=14239) 18005 Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl...

Trident Hose Hose-Sae J1942 1.5 x 12.5' 321-1124 This unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including: Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet...

Attwood Marine Thru Hull SS 1" 66548-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

1" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible handle...

1" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

G 1" BSPP Bronze 90 Degree Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread 90 degree Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1 Certified Note- C83600 bronze...

1" NPS NPT Combo Flush Thru Hull Features: Machined flat face for flush mount or dripless applications NPSM / NPT combination thread C84400 Bronze Sizes from 1/2" to 5" Available with or without nut

Jabsco Gasket For #6050 Pump 890-0000  

Johnson Pump Cartridge F/1000gph Bilge Pump 28512   Replacement motor cartridges for JP aerators, bilge, low boy, twinport, and shower sump pumps Universal pump housing allows for upgradeable GPH Motors fits JP aerators, bilge, lowboy,...

Perko Combo Gas Fill/Tank Vent Whit 1319Dpgwht Plastic. Integral tank vent. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.Gas versions include a flame arrestor.

Rule 1100gph Motor 47Dr

Sea-Dog Line Brass Drain Tube - 1 In X 2 7/ 520230-1 Formed brass. 1" inside diameter.

Seachoice Baitwell Plug-3/8 -Brass 50-18931 For use in livewells or baitwellsStainless steel top and bottom plateBrass camNeoprene body.

Seachoice Thru Hull W/SS Cover-1 1/4 St 50-18471 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Seachoice Nylon Drain Plug 18641 Black Nylon • 1" hole diameter • Use #10 screws

Seachoice Tee White 1 1/8 Hose I.D18251 Can be used for plumbing or aerator systemsMade of white high impact plastic for corrosion resistance.

Trident Hose Clamps T-Bolt 1-1/8-1-1/4" 7201140Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Trident Hose Clamps T-Bolt 2-7/8-3-1/4" 7203000L Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Attwood Marine Drain Plug Brass Snap Handle 7524D1 Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

1-1/4" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available