Plumbing

Shurflo 12 Volt Macerator 3200-001 Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with o-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual,...

Trident Hose Type A1 Barrier Lined 1/2 x 50 3650126Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified,...

Attwood Marine Brass T-Handle with O Chain 7526A7 Simply turn handle to lock plug in tube or to remove. Shaft, T-handle and washers are saltwater corrosion-resistant. Without chain.

Attwood Marine Float Switch with Cover 12V 4201-7 Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris...

1-1/4" NPS NPT Combo Stainless Steel Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread #316 Stainless Steel Sizes from 1/2" to 3" UL Listed 647B BSPP and Stainless Steel models available

1-1/4" NPT x 1-1/2" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" NPT x 1-1/2" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

2-1/2" NPT Bronze Full Flow Pipe to Hose Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

3" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded...

3/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

3/8" NPT Bronze In-Line Ball Valve Features: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole...

BSPP Bronze Inline Valve Features: Female British Standard Pipe Parallel (BSPP) Threads. 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining. Patented selectable...

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/4"  Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B

Johnson Pump 3/4 Thru Hull 90Deg. 75035-00 Fittings are molded of tough acetal resin so they will not rust, corrode, discolor nor are they susceptible to electrolysis.

Johnson Pump 5.2 gpm Wash Down Kit 70 psi 64534 New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5...

Perko Combo Gas Fill & Tank Vent-Wh 0542Dpgwht Polymer body, cap and strap. Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.

Rule Bilge Pump-500gph 12V Auto 25Sa Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100&deg, cooler. No burn-out when dry. Moisture...

Sea-Dog Line Brass Tee Handle Drain Plug - 520080

Sea-Dog Line Replacement Plug And Handle 5200471 Die Cast Bronze.

Sea-Dog Line Stainless Impeller Puller - La 660020-1 Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.