West System Products

Reusable Mixing Sticks are practical for epoxy mixing, application, filleting and as a cleaning tool. The squared, beveled end reaches mixing pot corners for thorough mixing and blending in fillers, and for cleaning up excess epoxy. Use the rounded end...

Reusable 807 Syringes can be loaded with your epoxy mixture for injecting into tight spots. Ideal for hardware bonding and small repairs. Holds 12 cc (about 0.4 fl oz). Basic Hardener Bonding with Epoxy and 807 Syringes Wet out a standard pilot hole...

Adhesive filler mixtures cure to a strong, hard-to-sand plastic useful in structural applications like bonding, filleting and hardware bonding. West System Colloidal Silica Adhesive Filler 406 Colloidal Silica is a thickening additive used to control...

West System G/Flex Adhesive 6552Qt Liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150;000 PSI, it is a bit more flexible than standard epoxies and...

G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, G/flex 650 is a bit more...

Handy Repair Pack Everything you need to complete small repairs around the boat, shop or home. The Handy Repair Pack contains two WEST SYSTEM 105 Resin/205 Fast Hardener packets, and enough adhesive filler to complete a variety of...

Flexible Plastic Spreaders The plastic spreaders are flexible, reusable 3½” x 6″ and double-edged for flow coating, fairing, filling and applying fabrics. Epoxy Spreaders or “squeegees” The WEST SYSTEM® 808 Plastic...

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Mix it...

209 Extra Slow Hardener is formulated for use with WEST SYSTEM 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately...

Fillable Caulking Tubes are designed for use with a standard caulking gun. Great for injecting large amounts of WEST SYSTEM Epoxy, laying a lengthy bead of epoxy, making fillets, or injecting epoxy into holes as in hardware bonding,...

G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, G/flex 650 is a bit more...

A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White Color. Color:...

Adhesive filler mixtures cure to a strong, hard-to-sand plastic useful in structural applications like bonding, filleting and hardware bonding. West System High-Density Adhesive Filler 404 High-Density filler is a thickening additive developed for...

879-2 and 879-10 are the same tough, finely woven nylon fabric (often called peel ply). It is used to separate the breather and vacuum bag from the laminate in vacuum bagging operations. Excess epoxy bleeds through and is peeled from the cured...

879-2 and 879-10 are the same tough, finely woven nylon fabric (often called peel ply). It is used to separate the breather and vacuum bag from the laminate in vacuum bagging operations. Excess epoxy bleeds through and is peeled from the cured...

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

801-HD Roller Frame is a 3″ caged frame that holds 7″ full-width 800 Roller Covers as well covers cut to narrower widths for epoxy coating in tight spaces.   How to save your Roller Frame When you’ve completed a coating...