Paint & Maintenance

Trident Hose Seaflex 7/8 x 12.5 Soft Wall 11007841BPremium water hose for coolant, circulation, heat exchanger and discharge uses. 2 ply reinforcement resists heat, ozone and toilet chemicals. Made to marine standards. Blue stripe. 5 year warranty...

Trident Hose Seaflex Hardwall 2 x 12.5 2502004Premium wet exhaust hose for long and/or bent connections. Heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius. Made to marine standards. Resists...

Trident Hose Seaflex Hardwall 3" x 2' 250300024Premium wet exhaust hose for long and/or bent connections. Heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius. Made to marine standards. Resists...

Trident Hose Seaflex Softwall 3" x 4' 200300048It is a premium type certified wet exhaust hose for short straight connections. Thick tube and cover with 2 or4 ply reinforcement. Resists heat, ozone, fumes and collapse. Exhaust hose should be double...

Trident Hose Seaflex Softwall 5" x 2' 200500024It is a premium type certified wet exhaust hose for short straight connections. Thick tube and cover with 2 or4 ply reinforcement. Resists heat, ozone, fumes and collapse. Exhaust hose should be double...

Trident Hose Tri Sil Hump Hose/Clamps 3 270V3000SSVery high temp molded blue silicone. Comes with 4 stainless steel T-Bolt clamps. Made to marine standards. 350°F. SAE J2006 R3. 10 year warranty.

Trident Hose Type A1 Barrier Lined 5/16X50 3650566Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified,...

Trident Hose Vent Hose Black 3" x 50' 4023006For venting bilge gases and fumes. Resistant to ozone, sunlight and weather checking. Wire vinyl coated carcass is corrosion resistant. Vinyl construction will not support flame.

Uflex Hatch Lift Non-Lock 18 Stroke Av4512Specifically designed for the marine environment, the Uflex AV and AVL hatch lifters feature anodized aluminum and stainless steel construction. They can lift up to 265 lbs. in single actuator applications (530...

Uflex Hatch Lift-Fast Locking 12" Avl3012Specifically designed for the marine environment, the Uflex AV and AVL hatch lifters feature anodized aluminum and stainless steel construction. They can lift up to 265 lbs. in single actuator applications (530...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Versatile West System 9 oz woven E-glass fabric tapes, with bound edges, are ideal for reinforcing chines, hull/deck corners, and similar structural applications. When bonded with WEST SYSTEM Epoxy, they provide additional tensile strength to resist...

Versatile West System 9 oz woven E-glass fabric tapes, with bound edges, are ideal for reinforcing chines, hull/deck corners, and similar structural applications. When bonded with WEST SYSTEM Epoxy, they provide additional tensile strength to resist...

Breather Fabric is a lightweight, polyester blanket that provides excellent air passage within the vacuum envelope while it absorbs excess epoxy. 881-10  Breather Fabric, 45″ wide x 10 yd roll   What is vacuum...

These disposable gloves are made of lightweight, seamless neoprene. They are more chemically resistant than latex gloves. They provide excellent protection while retaining good fiber sensitivity and dexterity and they are more puncture resistant than...

209 Extra Slow Hardener is formulated for use with WEST SYSTEM 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately...

An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. Not recommended for long-term...

An easy to use, 2-part resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. Not recommended for long-term...

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color Size: 12oz