Plumbing Fittings

Sherwood Pump P Bracket 1-1/4 (Strain=18016 14238 Provides a sturdy mounting harness for Sherwood line strainers. Unique design enables easy trouble free assembly. Does not effect quick cleaning ability of strainer bowl.

Attwood Marine Drain Plug SS 1" Snap 7520A3Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Attwood Marine Plug-Snap Drain Br 7524A7Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.

Attwood Marine Thru Hull SS 5/8" Short 66540-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Beckson Marine Check Valve For 1-1/2 Hose Cv-1-1/2 For 1-1/2" flexible hose to reduce back pressure and facilitate easier pumping.

1" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

1-1/2" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow.  Stainless steel handle and hardware...

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

2" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

2" NPT x 2-1/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

3/4" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug...

ARG-750 Series 3/4" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

BP-15 Poly Basket - 3.1 x 18.3" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

G 1-1/4" BSPP Bronze Pipe to Hose Fitting Features: British Standard Pipe Parallel (BSPP) Thread Male BSPP x Hose connection C83600 Bronze Sizes from 1/2" to 4" Standard Flow ISO 9093-1 Certified Note- C83600 bronze fittings are not in compliance...