Dock Hardware

Tiedown Engineering Angle Brackets 3X3 26392F. Should be used for all cross supports.

Tiedown Engineering Piling Hoop 8 26429Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416).

Tiedown Engineering Angle Brackets 3X5 26398F. Should be used for all cross supports.

Tiedown Engineering T-Roller Assembly 10.5" x 2 26414Heavy duty roller assembly. An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Bracket and roller...

Taylor Dock Roller Wheel 24 -Rigid 1224Plastic dock wheels are designed for roll-in docks and boat lifts. Made of UV stabilized heavy duty; rotomolded polyethylene. Large diameter rolls easily on all terrains. Designed for maximum strength with no...

Tiedown Engineering Angle 2-1/2".Lx5".H Comm. 26406F. Should be used for all cross supports.

Tiedown Engineering Angle 2-1/2".Lx5".H Standard 26527F. Should be used for all cross supports.

Tiedown Engineering Angle Brackets 3X3 Sq Holes 26399F. Should be used for all cross supports.

Tiedown Engineering Angle Brackets 4X7 26380F. Should be used for all cross supports.

Tiedown Engineering Angle Brackets 4X8 26397F. Should be used for all cross supports.

Tiedown Engineering Back Up Plate 26413Q. Reinforcing plates are used to back up single T males and females. 5" x 5".

Tiedown Engineering Chain Holder 26529J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.

Tiedown Engineering Chain Holder Injin 26410J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.

Tiedown Engineering Cleat Angle 26422F. Should be used for all cross supports.

Tiedown Engineering Connector Pin Set 26531P. Used for quick disconnect of male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.

Tiedown Engineering Dock Hdw (M) Car.Bolt Set 8/Bg 26534Used to attach A thru K component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".

Tiedown Engineering Dock Hdw (N) Hex Head 8/Bag 24279N. Includes lock nut. Used to connect male and female connectors.Galvanized 3/4" x 3-1/2".

Tiedown Engineering Dock Hdw Car Bolt Setinmin 8/B 26535Used to attach A thru K component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".

Tiedown Engineering Dock Hdw Lag Bolt 3/8X3 8/Bag 24289Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Dock Hdw Lag Bolt 3/8X5 8/Bag 24292Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.