Seastar

Seastar Classic Tilt Replacement Kit Ha6523 Kit is designed to replace the tilting mechanism of a SeaStar Traditional and SeaStar Classic Tilt helms.

Seastar Tiller Bolt High Strength Up Ha5822

Seastar Tiller Bushing Kit Ha5820

Seastar Cylinder Hose Kit 18" S Star Ha5731Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with...

Seastar Grounding Strap-O/B Hyd Cyl Ha5477The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and...

Seastar Liquid Tiebar Valve Ha54712The SeaStar cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar as opposed to...

Seastar Dual Cyl Purge Hose For Ha5445 Ha5461

Seastar Fill & Vent Plug Kit SStar3 Ha5450 Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting,...

Seastar Power Purge Jr Ha5445-2 The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty...

Seastar Hydraulic Steering Oil Gallon Ha5440H   SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents,...

Seastar Fill Kit/Seastar-Syten(Ho5428) Ha5438 Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil...

Seastar Non-Vent Plug Ha5432

Seastar Hydraulic Steer Fluid Quart Ha5430H   SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents,...

Seastar Seastar 20 Deg Bezel Ha5419 For standard helms. Allows a SeaStar helm to be mounted 20&deg, from perpendicular (not for BayStar).

Seastar Seastar Helm Backmount Kit Ha5418 Square backplate kit for the 5271 and 5272 SeaStar helms. Used to retrofit new Seastar standard helm into hole cutouts

Seastar Kit Changes Hc4645 Into Hc4658 Ha4643Converts HC4645 into HC4658

Seastar Kit Changes Hc4645 Into Hc4648 Ha4642

Seastar Kit Converts Hc4645 To Hc4647 Ha4641

Seastar Spa Autopilot Retrofit Kit Ha1205

Seastar Power Assist Dual Ignition Kit Ha1201

Seastar Single Mt3 Topmt Dual Func Lev Ch5310P Combines classic binnacle styling with dual function levers, a neutral safety switch, and an engine warm-up feature. Now features longer shift travel...

Seastar Twin Mt3 Top Mount Dual Func Lev Ch5300P Combines classic binnacle styling with dual function levers, a neutral safety switch, and an engine warm-up feature. Now features longer shift travel...

Seastar Single S Top Mount Sing Func Lev Ch5210PSingle function. Highly polished, stainless steel covers. Suits 33C and 4300 type control cables. Adjustable throttle friction and shift detent feel...

Seastar Twin S Top Mount Single Func Lev Ch5200PSingle function. Highly polished, stainless steel covers. Suits 33C and 4300 type control cables. Adjustable throttle friction and shift detent feel...

Seastar Control Ski/Jet Side Ch2200PSingle lever, dual action for throttle & shiftSuperior neutral engine warm-up control (ski version)Flush mount design for quick, tidy installationIncludes hardware...

Seastar Side Mount Control Sailboat Ch2100P Features single lever/dual action design. Compact construction is perfect for sailboats and other applications where space is at a premium. Drop-in...

Seastar Solutions Stainless Steel Replacement Control Lever Handle 50010 Ca69060P   Replacement Stainless Steel Lever fits Teleflex CH5600 SLT and Morse Twin SR controls...

Seastar Shift Knob 50030 (Smooth) Ca69051P Features both visual and tactile distinction for throttle and shift, in keeping with the latest ABYC guidelines. Handles replace CH5400P & CH5600P twin...

Seastar Ch5600 Cable Attachment Kit Ca69022P

Seastar Dual Station Kit Ca68065PHardware kit for single or dual station installations. For use with 3300/33C type cables only.

Seastar 3300 Clamp And Shim Ca28020P

Seastar 4300 Ball Joint Ca28014P

Seastar 3300 Brass Pivot Kit F/Ch4400& Ca27563PBrass. Heavy duty. Fits Teleflex Morse and other control cables with 10-32 ends. Kit contains 2 each of pivot end, bushing, cotter pin and washer. For...

Seastar 3400/3300 Adapt-Kit OMC Only Ca27320P For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.

Seastar 3300/Adapter Kit Merc-O/B-I/O Ca27319PFor use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.

Seastar 400A High H.P.Connection Kit Ca27247P This kit is for use with CC170 series cables, over 35HP, 1973-1978.

Seastar 400A Low Hp Connection Kit Ca27208P This kit is for use with CC170 series cables, 35HP and below, 1973-78.

Seastar Univ-Inboard Connection Kit Ca27024PUniversal 30 Series

Seastar Autopilot Pump-Type 2 12V Ap1233 Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long...

Seastar Auto Pilot Pump 12V Type1 Ap1219 Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long...

Seastar Ball Knob Red 4009912 Replacement control knobs fit most controls with 3/8-24 threaded handles.

Seastar Ball Knob Black 4009819 Replacement control knobs fit most controls with 3/8-24 threaded handles.

Seastar Neutral Safety Switch Mt3 & Sg 305499

Seastar Control Adaptor - OMC 304939 For 3300/33C style cables

Seastar Morse Adaptor Kit-Mercruiser 302123For 3300/33C style cables

Seastar Dc Control 301916For throttle, choke, fuel shutdown. Uses 33C or 43C supreme cables.

Seastar Adapter Kit OMC O/B 301729Kit adapts 33C or 33C supreme for use with Evinrude/Johnson 55-235HP 1978 to 1985, 20HP and up in 1986, 20-25-30HP motors may need OMC kit 397488.

Seastar Terminal Eye Pin Kit 301456Contains terminal eye pin, E-ring, nut and washer.

Seastar Control Adapter Mercury 301074For 3300/33C style cables

Seastar Bulkhead Adapterutility Cable 300673Used in the field to adapt utility, neutral throttle, and vernier cables to mount in bulkhead applications.

Seastar Terminal Eye 300646

Seastar Cable Conn Kit 212151003

Seastar Dual Station Unit-Shift 207573The Dual Station (DS) unit is designed for inboard, sterndrive, or outboard boaters that like using one lever to do both throttle and shift in their dual station...

Seastar Dual Station Unit-Throttle 207572The Dual Station (DS) unit is designed for inboard, sterndrive, or outboard boaters that like using one lever to do both throttle and shift in their dual...

Seastar Dual Station Selector Unit 204993 The Dual Station (DS) unit is designed for inboard, sterndrive, or outboard boaters that like using one lever to do both throttle and shift in their dual...

Seastar Dual Station Unit-Throttle 177030The Dual Station (DS) unit is designed for inboard, sterndrive, or outboard boaters that like using one lever to do both throttle and shift in their dual...

Seastar Hardware Bag Twin S Control 30 61001

Seastar Sl3 Control Neutral Safety 51801033

Seastar Neutral Safety Switch S Contro 47307

Seastar Throttle Cable Brake 44386Installed at control end of cable to fight throttle creep. For 3300, 4300 and 6400 series.

Seastar Clamp & Shim #031532/031538 42756

Seastar Pivot 30 Series 1/4 Dia 39890

Seastar Dual Station Kit Twin S Control 39489002

Seastar Morse Pivot-30 Series 39471

Seastar Pivot 40 Series 39110

Seastar Morse Stop Collar 37693

Seastar Pivot 30 Series 37691

Seastar Terminal 37639

Seastar 1/4 x 1/2 Pivot 40 Series 36361

Seastar Cable Hook Clip 36174

Seastar Shim 30 Series 357773

Seastar Cable Clip Dual Station 35531

Seastar Ball Joint 30 Series Quick Rel 35242

Seastar Clevis 11/32 Thk Lever 33395Fit levers with thicknesses and holes given.

Seastar Ball Joint 40 Series Quick Rel 32267

Seastar Cable Clamp 30 Series 32010

Seastar Ball Joints 30 Series Quick Re 31799001

Seastar Pivots 30 Series 1/4'Dia 31539

Seastar 7/32 Shim 31538

Seastar Morse Pivot-40 Series 31537

Seastar Cable Clamp Two 7/32 Dia 31532

Seastar 7/32 Cable Clamps 31509

Seastar Cable Clip Assembly 30 Series 31419

Seastar Ball Joint Kit 1/4-28 30Ser. 31126

Seastar Clevis 30 Series 1/4 Dia 31125Fit levers with thicknesses and holes given.

Seastar Pivot 30 Ser 1/4 Dia 31029

Seastar Quick Release Ball Joint 40 Se 29104

Seastar Clevis 40 Series 1/4 Dia 29025 Fit levers with thicknesses and holes given.