Mercury Marine / Quicksilver

NEW OEM MerCruiser Starter 50-863007A1 (Replaces 50-806964A3 & 50-806964A4) For most late model Chevy GM Marine engines with the 14 inch flywheel Fits most MerCruiser Engines:• 3.0L /...

MerCruiser Gimbal Plug Kit Alpha / Bravo 22-88847A1 This plug kit is used to access the gimbal ring upper swivel pinFor Alpha Gen 2 and All Bravo Transom Assemblies as well asMCI, IR, MR, MC-TR, TRS...

OEM MerCruiser Fuel Pump & Cooler Kit  861156A1 861156A03 8M0125852(s/n 0M30000 and up) Fuel pump/cooler kit 8M0125852 is use on V-6 and V-8 MerCruiser EFI stern drive and inboard engines...

OEM MerCruiser Fuel Pump & Cooler Kit  861156A1 861156A02 8M0125846 (S/N 0L000000 - 0M300000) Fuel pump cooler kit 8M0125846 is for use on V-6 and V-8 (305, 350, 377, 454 & 502 CID)...

OEM MerCruiser trim cylinder end cap (AKA Anchor pin cap) Trim system anchor pin cap 14842 is for use on MerCruiser Alpha, Bravo and TRS stern drives. When replacing the anchor pin cap be sure...

OEM MerCruiser Gimbal Water Hose Inlet Nipple Gasket For all Bravo drives #24 in the drawing Manufacturer Part number: Old 27-441081 New 27-8M0061737    

NEW OEM Factory MerCrusier Bravo 3 outdrive lower unit Replaces: Old Part Numbers: 8M0086825, 1656-8M0086825, and 1656-8866G09 New part # 1656-8M0046738 Will work for 1.81  2.00 and 2.20...

OEM MerCruiser Alpha 1 Gen 2 Transom Bellows Repair/Reseal Kit 30-803099T1 Complete for MerCruiser® #1 drives and Alpha One® Generation 2 (Fits units from approx 1991 and...

3.0L ALPHA TKS – 8M0116645 ss to 8M0187358 135 HP @ 4400-4800 RPM Quicksilver now builds the iconic 3.0L engine to repower your classic sterndrive runabout. Affordable and fun, this is...

MerCruiser Plus Series 383 Mag Stroker MPI Bravo     Part Number 865108R80 Horsepower @ flywheel 350 Kilowatts @ flywheel 261 Maximum RPM (WOT) 4800-5200 Cylinders V-8...

OEM MerCruiser Exhaust Manifold 90 Drain Plug Elbow Fitting 22-862210a01 Stainless Steel Exhaust Manifold Drain Elbow Kit 862210A01 is for use on V-6 and V-8 MerCruiser stern drive and inboard...

Brand New OEM MerCruiser Bravo 1 1.50 ratio outdrive! Factory warranty(1 year parts and labor, 3 years corrosion) 714-5-5231200tp also replaces bravo 1 classic # 714-5-5231200np   Ships...

OEM MerCruiser (not stainless) Upper Steering Shaft Pin (Bravo / Alpha) 98230A1 Kit 1: • 12-98548 Washer (large washer) • 12-85344 Washer (small washer) •...

OEM Quicksilver/Mercury Stainless Steel Upper Steering Shaft Pin (Bravo/Alpha) 866718A01 Kit 1: • 12-98548 Washer (large washer) • 12-85344 Washer (small...

OEM MerCruiser 496 Brass Sea Water Pump With Air Fittings 46-862914T12 46-8M0122658 New Number 46-8M0139997 Pulley Not IncludedOld Part number 46-862914T12 superseded to new Part Number:...

OEM MerCruiser V6/V8 Brass Sea Water Pump With Air Fittings  46-862914T11 46-8M0122657 Item Supersession Chain: RowClassPart NumberSS LevelDispDescription 1 46 8M0139996 00 ACT SEA...

OEM MerCruiser Bravo V8 454/502 Sea Water Pump With Pulley 46-807151A8 (AKA Raw Water Pump/ Seawater pump) Pulley includedFits 454 502 1992 - 1999 with the mount for the fuel pumpAlternate...

OEM MerCruiser V8 Sea Water Pump Assembly V-Belt  46-72774A32 (AKA Raw Water Pump/Seawater pump)  • Pulley not included • Fits most V8 MerCruiser engines from 1985-1995...

MerCruiser sea water pump assembly (AKA Raw Water Pump/ Seawater pump) Pulley not included  Replacement sea water pump housing 807151A12 is plastic to combat corrosion in saltwater...

Replacement sea water pump housing 807151A9 is plastic to combat corrosion in saltwater installations. It is for V-6 and V-8 MerCruiser engines made by General Motors with a serpentine belt pulley...

NEW OEM Factory MerCruiser  BRASS sea water pump assy WITHOUT Air Fittings (AKA Raw Water Pump/ Seawater pump) Casting number on this pump housing is 8629140 and the casting number on the...

OEM MerCruiser V6/V8 Dry Joint Exhaust Riser 1.7" Spacer Kit  865995A01 for V6 and V8 engines with (14 degree risers)864309T01, 864309T02 (std cooling)Will work with Dry Joint Exhaust only...

New OEM Y-Pipe Works with many mercruiser engines!part number 807130a4 casting number 807130-c or 861229c Replaces 815786 8M0115149 807130a4 807130c 861229c exhaust Flappers included !

NEW OEM MerCruiser V6 V8 Exhaust Riser spacer kit 6" 6 inch 93322A12  • For all MerCruiser center riser manifolds • All V6 and all V8 engines from early 80+ • New...

MerCruiser down Elbow Tube 14478T01 Used for converting the 1 peice manifolds!Elbow tube for MerCruiser MODEL 175-205 - V6, GM 229/262 CID (1983 up to 0M SN #) Please confirm fitment of MerCruiser...

OEM (14 degree risers) MerCruiser V6/V8 Dry Joint Exhaust Riser 6" Spacer Kit (std cooling) Fits: • MerCruiser • 4.3L, 5.0L, 5.7L, 6.2L • Part...

MerCruiser straight hose fitting 22-866725 22-863804 22-866725 replaces 22-863804 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided via Mercury may...

MerCruiser " T " fitting for under manifold 22-863786A1 Exhaust manifold drain t-fitting 863786A1 is for use on MerCruiser V-6 and V-8 (305, 350 and 377 CID) engines with water drain systems. See...

OEM MerCruiser 4.3 V6 Exhaust Kit For MerCruiser 4.3 engines with DRY JOINT center riser exhaust and 14 degree 4 inch risers (if you are not sure of the angle of your risers, please call us with...

OEM MerCruiser 4.3 V6 Exhaust Kit For MerCruiser 4.3 engines with DRY JOINT center riser exhaust and 7 degree 4 inch risers (if you are not sure of the angle of your risers, please call us...

OEM MerCruiser DRY JOINT 3 inch riser kit For V6 and V8 engines with (14 degree risers) 864309T01, 864309T02 (std cooling) Will work with Dry Joint Exhaust only Includes: •...

OEM MerCruiser 496 6" Spacer / Riser Block Old Part Number: 866768T New Part Number: 8M0124066 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided...

MerCruiser 496 Mag & MIE 8.1L Standard Exhaust Elbow Exhaust elbow 865331A02 is for use on MerCruiser 496 Magnum stern drive and 8.2L Magnum (non-EC) inboard engines. Made of Stainless Steel,...

OEM MerCruiser 496 Mag Exhaust Manifold 866178A02     Exhaust conversion kit 866178A02 converts exhaust manifolds with water rails to the newer style, cast iron manifolds without...

OEM MerCruiser Exhaust Riser mounting bolts (extended) (63/4") Fits 4.3 , small block, and big block MerCruiser engines with 4" Riser Elbows Will not work for dry joint (2002+) ONLY for riser...

CONVERSION KIT 864293a02 Includes: • 2x upper rubber tube (elbow to intermediate elbow) - 32-44358001 • 2x lower rubber tube (for original Y pipe)...

NEW Factory MerCruiser Exhaust Riser Gasket This gasket is used between the riser and the manifold on MerCruiser 496 engine Exhaust elbow gasket 862356 is for use on 496 Magnum and 8.1S MerCruiser...

New OEM Dry Joint exhaust kit 7 Degree For MCM Serial numbers (OM600000-OW309999) approx 2002-2004 (some early 2005) with 7 degree risers! Includes: • 2x Part Number: 864309T02...

OEM (7 degree risers) MerCruiser V6/V8 "Dry Joint" Exhaust Riser 3" Spacer Kit (7 degree risers) (std cooling) For V6 and V8 engines with (7 degree risers) 864309T02 (std cooling)Will work with Dry...

NEW OEM MerCruiser 3 inch spacer kit Exhaust riser kit 93320A13 is for use on MerCruiser V-6 TBI stern drive engines with 2-piece exhaust manifolds (serial number 0M614999 and below). Will also fit...

OEM MerCruiser 496 Mag Exhaust Manifold Cast-Iron Alloy  Exhaust manifold 866178T01 is for use on MerCruiser 8.1L and 8.2L non-EC sterndrive and inboard engines. Without water rail...

OEM Quicksilver/Mercury Exhaust Flapper/Shutter 807166A1 Stern drive exhaust water shutter 807166A1 is for use on MerCruiser stern drives to keep following seas/water from washing back into the...

OEM MerCruiser Exhaust Riser mounting bolts Fits 4.3 , small block, and big block MerCruiser engines with 4" Riser Elbows Will not work for dry joint (2002+) Not for riser mounted remote oil...

NEW OEM MerCruiser (center riser style) Exhaust manifold mounting bolts Fits V6 and small block engines 5.0-305 , 6.2-377, 383approx 1986+ V6 uses 6 bolts per manifoldV8 uses 4 bolts per manifold

New OEM MerCruiser Big block manifold mounting bolt 454 /502 Each manifold requires 8 of these bolts

OEM MerCruiser 4.3 V6 Exhaust Manifold & Riser Kit For MerCruiser 4.3 engines with center riser exhaust and 4 inch risersApprox 1986-2002 with some exceptions Includes: • 2x...

OEM MerCruiser exhaust Kit for 5.7 350 or the 5.0 305 Small block and 6.2 377   For MerCruiser center riser small block V8 engines approx. 1986-2002 (if you have a 2002, you may need dry...

OEM MerCruiser 454 and 502 Exhaust Kit Fits: • 454 and 502 center riser style engines with 4 inch risers • Approx. 1983-2002 Includes: • 2x OEM MerCriuser...

OEM MerCruiser 350/5.7/5.0/6.2 dry joint SB V8 Exhaust Manifold & Riser Kit (14 Degree) Fits:• 2004 and newer MCM GM V-6 & V8 (305 350 & 377 cid) engines with dry joint exhaust...

OEM MerCruiser DRY JOINT Restricted riser elbow Gasket 27-864850a02 Exhaust elbow gasket 864850A02 is for use on 2002 and newer V-6 and V-8 MerCruiser stern drive and inboard engines with dry joint...

OEM MerCruiser DRY JOINT riser elbow Full Flow Gasket 27-864547a02 Exhaust elbow gasket 864547A02 is for use on 2002 and newer V-6 and V-8 MerCruiser stern drive and inboard engines with dry joint...

OEM MerCruiser DRY JOINT riser elbow block off Gasket 27-864549a02 Exhaust elbow gasket 864549A02 is for use on 2002 and newer V-6 and V-8 MerCruiser stern drive and inboard engines with dry joint...

OEM MerCruiser Restricted Riser Elbow Gasket 27-863724 Exhaust elbow gasket 863724 is the standard cooling, restrictor gasket. This gasket is for use on V-6 and V-8 MerCruiser stern drives and...

OEM MerCruiser Full Flow Riser Elbow Gasket 27-863726 Factory gasket that goes between the manifold and riser. Used on GM V6 and V8 engines. This is the Completely open gasket for Full Flow engines...

OEM MerCruiser Block off riser elbow Gasket 27-8637251 Factory gasket that goes between the manifold and riser. Used on GM V6 and V8 engines. This is the Completely blocked off gasket for closed...

Exhaust elbow gasket 27-997772 for use on 120 series (1983 and newer), 140/3.0L in-line 6-cylinder and V-8 small block (1982 and older) MerCruiser stern drive and inboard engines made by General...

OEM MerCruiser Big Block Manifold to Head Gasket 27-46820 Exhaust manifold gasket 46820 is for use on V-8 (454,482, 496, 502 and 540 CID) engines made by General Motors for MerCruiser stern drives...

OEM MerCruiser V8 Small Block Manifold to Head Gasket 27-33395 Exhaust manifold gasket 33395 is for use on V-8 (283, 305, 350 and 377 CID) engines made by General Motors for MerCruiser stern drives...

OEM MerCruiser 4.3 V6 Manifold to Head Gasket 27-99757 / 8M0215011 Factory gasket that goes between the head and manifold. Used on all center riser 4.3 engines Exhaust manifold gasket 99757 is for...

OEM MerCruiser 3.0 Manifold to Head Gasket 1990 + Exhaust manifold gasket 815528 is for use on 3.0L (1998 and newer) and 3.0LX (1990 through 1997) engines made by General Motors for MerCruiser stern...

OEM MerCruiser 3.0 Manifold to Head Gasket 1968-1982 Factory gasket that goes between the head and manifold. used from years 1968-1982 Please confirm fitment of MerCruiser parts with your serial...

OEM MerCruiser 3.0 Manifold to Head Gasket 1983-1995 Please confirm fitment of MerCruiser parts with your serial numberPhotos and descriptions provided via Mercury may not always be accurateAll of...

OEM Quicksilver/Mercury 4" Dry Joint 14 Degree Riser/Elbow  864591T02 These Will only work with Dry Joint systems! Exhaust elbow 864591T02 is for use on V-6 and V-8 MerCruiser stern drive...

OEM 7 Degree Dry Joint Riser Exhaust elbow 864309T02 is for use on V-6 and V-8 MerCruiser stern drive engines made by General Motors with dry joint exhaust manifold (model year 2002 through 2004,...

OEM MerCruiser 4" E-Coated 7 Degree Riser/Elbow  807988Q03 Fits MerCruiser GM V6 & V8 engines with center rise outlet exhaust manifold (approx 2002 & older) Replaces OEM#:807988A2 ,...

OEM MerCruiser 4" Ceramic Coated Riser/Elbow  807988A03 Exhaust elbow 807988A03 is for use on V-6 and V-8 MerCruiser stern drive or inboard engines made by General Motors having a center rise...

OEM MerCruiser 454 / 502 / 7.4 Manifold 807078T08 OEM MerCruiser E-Coated Exhaust Manifold Exhaust manifold 807078T08 is for use on the port or starboard (left or right) side of V-8 MerCruiser...

OEM MerCruiser 454 or 502 Ceramic Coated Manifold 807078T10 89011 Fits 1981 and up GM 454 d 502 Port or Starboard Side. Replaces part numbers 89011A8, 807078A2, 807078A4, 807078A6,...

OEM MerCruiser 5.0 or 5.7 Exhaust Manifold Dry Joint (2002+) 865735a02 SS to 8M0185794 Fits most V-8 305, 350 & 377  engines 2002 and up, Port or Starboard Side. Ceramic coating old...

OEM MerCruiser 5.0/5.7/6.2 350 Exhaust Manifold 860246Q11  Replaces 860246A10 860246a15 860246-c Exhaust manifold 860246Q11 is for use on the port or starboard (left or right) side of V-8...

OEM MerCruiser 5.0 or 5.7 Exhaust Manifold Ceramic Coated 860246A15 Exhaust manifold 860246A15 is for use on the port or starboard (left or right) side of V-8 MerCruiser stern drive and inboard...

OEM MerCruiser 4.3 Dry Joint Exhaust Manifold (2002+) 864612T01 Exhaust manifold 834612T01 is for V-6 MerCruiser stern drive and inboard engines made by General Motors with dry joint exhaust systems...

OEM MerCruiser 4.3 V6  Ceramic Coated Exhaust Manifold 99745 99746A17  Exhaust manifold 99746A17 is for use on the port or starboard (left or right) side of V-6 (220 and 262 cid)...

Exhaust Elbow Fits MCM 140 Exhaust Elbow: 3.0L/V8 1982-Older Exhaust Elbow-Lo Profile: 2.5/3.0L 1982-95

OEM MerCruiser manifold for 3.0 Liter Engines 1990 and Newer using the "MERCARB" 860235A03 This has a single idle air adjusting screw. Included with the manifold are: gaskets, pipe plugs, fuel...