Plumbing

Trident Hose Tri Sil Hump Hose/Clamps 3 270V3000SSVery high temp molded blue silicone. Comes with 4 stainless steel T-Bolt clamps. Made to marine standards. 350°F. SAE J2006 R3. 10 year warranty.

Trident Hose Type A1 Barrier Lined 5/16X50 3650566Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified,...

Trident Hose Vent Hose Black 3" x 50' 4023006For venting bilge gases and fumes. Resistant to ozone, sunlight and weather checking. Wire vinyl coated carcass is corrosion resistant. Vinyl construction will not support flame.

Attwood Marine 1/2" Bailer Plug Brs Handle 7533A7Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.

Attwood Marine 3/4" Thru Hull Connector 3896-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Attwood Marine 5/8" Baitwell Drain Plug 7534A3Cam-action neoprene plugs snap shut to form a stopper for livewells or baitwells. Clockwise turn of the handle tightens the plug, and the lever flips down to lock. Note: Not for use with chemicals or fuels.

Attwood Sahara MK2 S1200 Bilge Pump 1200 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and...

Attwood Sahara MK2 S500 Bilge Pump 500 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals...

Attwood Marine Pump-Hd200012V 4760-4Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and...

Attwood Marine Thru Hull SS 1" Short 66542-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru Hull SS 1-1/2" Short 66545-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru Hull SS 3/4" Short 66541-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull Connector 5/8" White 3872-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Beckson Marine 18 Hand Pump with 20 Of Tubing 118PhSelf-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive,...

Beckson Marine Bilge Pump 24" with 6' Hose 124Pf6Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine Bilge Pump 30" with 32" Hose 230PfSelf-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine Handy-Mate Hand Pump 216PcFor oil, diesel fuel, water, boat, home and car. For routine pumping jobs and more. Use for bilges, sump tanks, crankcase oil changing. Comes with kit of tubes, hoses, reducing foot and adapter. Tough marine...

1" FNPS 90 Degree Bronze Pipe to Hose Fitting Features: 90 degree Female NPS X Hose connection C84400 Bronze Sizes from 3/4" to 2-1/2" Standard Flow Note- C84400 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

1" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The...

1" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)