Plumbing

1" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

1-1/2" BSPP Scoop Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread Designed for increased flow compared to standard Thru Hulls C83600 Bronze Sizes from 1/2" to 2-1/2" Available with or without nut NPS models available

1-1/2" NPT Bronze 3-Way Valve Features:3-way valve operates logically - The handle points to the direction of flowCenter position is "off"Handle rotates a full 180°.Mount foot included.Full flow.  Stainless steel handle and hardware...

1-1/4" 90 Degree Hose Thru-Hull Fitting Features:90 Degree Barb#316 Stainless Steel Thru Hull with Bronze Hose ConnectionUL Listed 647B

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with...

1/2" Bronze Pipe Nipple Check Valve Features: C83600 cast bronze construction NPT threads 1/2" - 2" sizes Not suitable for use with diesel fuel or gasoline Maximum recommended temperature = 176-F (80-C)

2" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

2" NPT x 2-1/4" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

3/4" Ball Valve/Seacock & Raw Water Strainer Combo Features: Square hole in handle accepts standard ratchet 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug...

ARG-750 Series 3/4" Raw Water Strainer with Non-Metallic Plastic Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel &...

2" BSPP Bronze Thru Hull Features: British Standard Pipe Parallel (BSPP) Thread C83600 Bronze Sizes from 1/2" to 4" UL Listed 647B Available with or without nut

Bronze Vented Loop - 3/4" Hose  Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or...

HF Series Hand Operated Marine ToiletFeatures:Sturdy bronze base for rough water useT-Handle for ease of operationHigh-efficiency valve system uses minimal flush waterWeighs 32 poundsNo Assembly required

Jabsco 12V Par-Mate Water Pressure System 46010-2900 Corrosion resistant 2 chamber diaphragm pump fitted with an on-demand pressure switch provides reliable flow for up to two fixtures. Able to run dry without damage, self-primes up to 4', and meets ISO...

Jabsco Jabsco Mag Drive Pump-11 GPM 436977 Designed for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, ice makers, hot water circulation, livewell and bait tank installations. Pump...

Jabsco Jabsco Mag Drive Pump-21 GPM 436981Designed for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, ice makers, hot water circulation, livewell and bait tank installations. Pump head...

Jabsco Kit Service 29101-0000

Jabsco Par 12V Conversion Kit 25Amp 29200-0120 Easily converts all PAR manually operated toilets to convenient electric operation. Complete for 29090/2910 series. Existing discharge plumbing remains undisturbed for ease of installation. Inlet port fits...